[Basic Setting2] Page

TOP

This page sets fundamental camera and encoding parameters. This page can be used during access using“admin” or “operator”.

Click [Basic Setting2]in the side menu.

Press the [OK]button to enable the new settings.

If the [OK]button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel]button to restore the invalid entry to the value before the change was made.

Memo

If you enter the following URL directly into the address bar of Internet Explorer, you can open the [Basic Setting2]page without going through the Built-in Viewer.
http://192.168.0.2/cgi-bin/display.cgi?basicmenu2.html

H.264 High indicates the H.264 High Profile standard.

Settings

Setting values with circle_B are default values.

Camera

Camera ID

Text entered here will be written in the H.264 header and the JPEG comment segment (item name: camera). It links to the [Camera ID]of the [Camera].
For details, refer to the following.

[Camera]Page

Memo

For more details about the format of the JPEG files, refer to the “API Guide” on the supplied CD-ROM.

Scenefile

You can select the setting that is suitable for the shooting scene. You can select the following eight scenes. You can customize the camera page settings (except Camera ID) stored in “ Scenefile”.
For details, refer to the following.

[Camera]Page

General:
General location

Indoor:
Place with indoor lighting

Outdoor:
For shooting the subject in sunlit conditions

ActiveGamma:
The most appropriate gamma correction is applied according to the brightness of the image.

Traffic:
For shooting a subject that moves at high speeds, for example, during road surveillance.

DataSaving:
Data can be saved for VBR or VFS coding using noise suppression.
For details about the VBR or VFS settings, refer to “[Encoding]Page ”.

Day(Color):
Always shoots in color. This setting is used for shooting in bright locations such as in sunlit areas during the day.

Night(B&W):
Always shoots in black and white. This setting is used for shooting in dark locations such as at night or when the object is illuminated by infrared light.

[Set values: General, Indoor, Outdoor, ActiveGamma, Traffic, DataSaving, Day(Color), Night(B&W)]

Memo

Select “Day(Color)” or “Night(B&W)” when you switch the Color or B&W using an alarm trigger.
(Example: If you want to shoot in the Black & White mode after reaching a certain time, set the action for scene file switching to B&W, and specify the time by making a selection in Condition 1. Doing so switches the scene file to B&W at the specified time, allowing you to perform shooting with the mode fixed at Black & White.)
For details on alarm trigger, refer to the following.

[Alarm]Page

Encode

Select the frame size for each screen of JPEG and H.264 from the following six patterns.

Selectable distribution size

H.264 High 1920 1080 30 fps
(Frame size: 1920 1080, frame rate: 30 fps, communication speed: 8 Mbps, bit rate: CBR, I Frame Interval: 30 frames)

H.264 High 1920 1080 5 fps
(Frame size: 1920 1080, frame rate: 5 fps, communication speed: 2 Mbps, bit rate: CBR, I Frame Interval: 5 frames)

JPEG 1920 1080
(Frame size: 1920 1080, frame rate: 5 fps, file size per frame: 200 KB, bit rate: AFS)

JPEG 1280 960
(Frame size: 1280 960, frame rate: 5 fps, file size per frame: 120 KB, bit rate: AFS)

JPEG 640 480
(Frame size: 640 480, frame rate: 5 fps, file size per frame: 30 KB, bit rate: AFS)

Set in "Encoding" Page
(Multi-encoding and details can be set on the [Encoding] page.)

Memo

If “Set in "Encoding" Page” is selected, the details can be set in the [Encoding] page.

[Encoding]Page

For more details about the format of the JPEG files, refer to the “API Guide” on the supplied CD-ROM.