[Alarm] Page

Disable:
Performs no action.

TCP:
Sends the text string input in the [TCP/ UDP Data] field via TCP to the recipients specified in [TCP/ UDP IP Address] and [TCP/ UDP Port Number].

UDP:
Sends the text string input in the [TCP/ UDP Data] field via UDP to the recipients specified in [TCP/ UDP IP Address] and [TCP/ UDP Port Number].

Switch Scene File:
Specifies the filming scene.

Position:
Moves to the position set at [Action Position Number].

Pin Output1 Make:
Changes Pin Output1 to Make.

Pin Output1 Break:
Changes Pin Output1 to Break.

Pin Output2 Make:
Changes Pin Output2 to Make.

Pin Output2 Break:
Changes Pin Output2 to Break.

TCP IP Address:
Enter the IP address or FQDN of the destination of TCP notification.

TCP Port Number:
Enter the port number of the destination of TCP notification. (1 to 65535)

TCP Data:
Enter a character string to be sent for TCP notification. Input not more than 127 characters.

JPEG Attachment:
Specify whether or not to attach an image file to the mail. To attach JPEG images, check the Attach box and select the transmission channel.

Encoder:
Specifies an Encoder No. for encoding of attached JPEG files.

UDP IP Address:
Enter the IP address or FQDN of the destination of UDP notification.

UDP Port Number:
Enter the port number of the destination of UDP notification. (1 to 65535)

UDP Data:
Enter a character string to be sent for UDP notification. Input not more than 127 characters.

Scene File:
Select the scene file to change. For details of the scene file, see the [Camera] page.

Alarm Output Duration:
Specify the output time when the [Action] item is set to “Pin Output1 Make”, “Pin Output1 Break”, Pin Output2 Make, or Pin Output2 Break.