Main PageCopying > Creating a Disc Using a Connected Blu-ray Recorder

Creating a Disc Using a Connected Blu-ray Recorder

You can create discs using a Blu-ray recorder by connecting it to this unit using a USB cable.

Remove the AC adapter and battery pack from this unit.

Open the LCD monitor.

C2A_Common_Monitor_Open

Connect to a Blu-ray recorder.

PCconnect_Blu-ray
sub_step1
Connect using the provided USB cable.
sub_step2
Connect the AC adapter to this unit.

This unit powers on automatically when the AC adapter is connected.

Be sure to use the supplied AC adapter.

This unit turns on and the “SELECT DEVICE” screen appears.

Tap “CONNECT TO OTHER”.

CONNECT TO OTHER

Operations are to be performed on the Blu-ray recorder after the screen switches.

Perform dubbing on the Blu-ray recorder.

Refer also to the instruction manual of the Blu-ray recorder.

After dubbing is complete, disconnect the USB cable. Operations cannot be performed on this unit until the USB cable is disconnected.