Main PageUsing Wi-Fi > Send Still Images via E-mail upon Detection of Face or Movement (DETECT/MAIL SETTING)

Send Still Images via E-mail upon Detection of Face or Movement (DETECT/MAIL SETTING)

A still image is automatically captured and sent via e-mail when faces or movements are detected by the camera.
Children may, for example, send still images to their parents via the camera to inform them of the happenings at home.

C2-WiFi_Example_DETECTMAIL

Memo

  • The size of the still image that is captured in “DETECT/MAIL SETTING” is 640 x 360.
  • Operation via connection to a smartphone (or computer) using “OUTSIDE MONITORING” may be performed even during detection standby.
  • When the camera is connected to a smartphone (or computer), “DETECT/MAIL SETTING” will be temporarily unavailable.
  • You can set to record videos on this unit automatically during detection.
  • To prevent too many e-mails from being sent in case of detections occurring frequently, you can set the interval of e-mail delivery.

Caution

  • This function is not designed for disaster or crime prevention.
  • To prevent the situation of forgetting to turn off the power, this unit will turn off automatically after 10 days of continuous usage.
  • While on standby for notification mails, the focus is fixed. Perform the camera settings first, then enable notification mails.
    Focus may not be set correctly if the notification mails start before camera settings are made. In this case, disable notification mails temporarily, then enable it again.
  • Be careful not to cause too much sending of e-mails. Depending on the internet provider that provides the e-mail service, the e-mails may be marked as spam or the usage limited may be exceeded.
    Be sure to check the terms of the internet provider in advance to find out if there are any restrictions on the number or size of e-mails that can be sent.
  • When setting another person as the recipient, be sure to obtain his/her consent in advance.
  • If you reply to the received e-mail by using this unit, the receiver can not check your replied e-mail by using this unit.
    Check the e-mails sent by this unit from computer, etc.
  • JVC will not be responsible for any trouble that occurs upon the sending of mails.

What You Need

Wireless LAN router (use a product that has a Wi-Fi certification logo)

Internet connection

Account for sending e-mails (Supports SMTP. E-mail services that is only accessible from the web cannot be used.)

Necessary Settings

To send e-mails, the following settings are required.

*The above settings are not necessary if they have already been set for other functions.

Registering an access point

Setting the account for sending e-mails

Registering the recipient’s e-mail address

Selecting the Recipient’s E-mail Address

Tap “MENU”.
(Operation on this camera)

Tap MENU

The shortcut menu appears.

Tap “Wi-Fi” ( Wi-Fi ) in the shortcut menu.
(Operation on this camera)

C2-WiFi_Shotcut MENU

Tap “DETECT/MAIL SETTING”.
(Operation on this camera)

C2-WiFi_DETECTMAIL SETTING1

Tap “RECIPIENT'S EMAIL”.
(Operation on this camera)

C2-WiFi_DETECTMAIL SETTING2

Tap the e-mail address to be set as recipient.
(Operation on this camera)

C2-WiFi_DETECTMAIL SETTING3

An icon Mail appears beside the recipient’s e-mail address.

After setting, tap “SET”.

Settings will not be saved until “SET” is tapped.

Operation Method

Set up the camera at the recording location.

Tap “MENU”.
(Operation on this camera)

Tap MENU

The shortcut menu appears.

Tap “Wi-Fi” ( Wi-Fi ) in the shortcut menu.
(Operation on this camera)

C2-WiFi_Shotcut MENU

Tap “DETECT/MAIL”.
(Operation on this camera)

C2-WiFi_DETECTMAIL1

Images are captured automatically when moving subjects or human faces appear on the camera’s screen. (The PHOTO icon appears on the screen upon detection.)

The captured still images will be sent via e-mail to the selected recipients.