Main PageRecording > Taking Still Images in Auto Mode

Taking Still Images in Auto Mode

You can record without worrying about the setting details by using the Intelligent Auto mode.

Open the LCD monitor.

C2C_MoviePhoto_P

Check if the recording mode is PHOTO .

If the mode is MOVIE video, tap MOVIE on the recording screen to display the mode switching screen.
Tap PHOTO to switch the mode to still image.

Check if the recording mode is iA Intelligent Auto.

Tap Image Play

If the mode is MANUAL_MODE Manual, tap MANUAL_MODE on the recording screen to display the mode switching screen.
Tap iA to switch the recording mode to Intelligent Auto.

Tap Auto&Manua

Set the focus on the subject.

C2C_Shoot_Photo_Shot_Half

When focused, the focus icon lights up in green.

Take a still image.

C2C_Shoot_Photo_Shot_Full

PHOTO lights up when a still image is being captured.

Some displays disappear after approximately 3 seconds.
Use the D-Appear button to change the displays.

Memo

  • Depending on the subject and shooting conditions, recording may not be performed properly even in the Intelligent Auto mode.
  • Image stabilization only starts when the button is pressed halfway.

Indications During Still Image Recording

C2B3_Indications Still Image Recording
Display Icon Description
num_1

Image Size

Displays the icon of the image size.

The size of still images can be changed.

num_2

TOUCH PRIORITY AE/AF

Displays the setting of “TOUCH PRIORITY AE/AF”. By default, it is set to “FACE TRACKING”.

num_3

Time

Displays the current time.

num_4

Recording Media

Displays the icon of the media where still images are recorded to.

num_5

Battery Indicator

Displays the approximate remaining battery power.

num_6

Recording Mode

Displays the current recording mode of iA (Intelligent Auto) or MANUAL_MODE (Manual).

num_7

Remaining Number of Shots

Displays the remaining number of shots for still image recording.

num_8

Recording in Progress

“PHOTO” appears when a still image is being captured.

num_9

Focus

Lights up in green when focused.

num_10

Aperture Value

Displays the aperture value.

num_11

Shutter Speed

Displays the shutter speed.

Scenes of Intelligent Auto

Display Icon Description
iA_CLOSE-UP

Captures one’s skin beautifully.

iA_PERSON

Allows people to be captured naturally.

iA_LANDSCAPE

Focuses at a far distance and captures a sharp image with vivid colors.

iA_LOW_LIGHT

Records with minimal noise in the overall image.

iA_NIGHT_VIEW

Allows night scenes to be captured accurately with minimal noise in the overall image.

iA_BEACH_SNOW

Prevents colors from fading even when recording in a bright environment.

iA_MACRO

Records while focusing on a near object.

iA_FOREST

Reproduces the green color of trees vividly.

iA_SUNSET

Reproduces the colors of sunset naturally.

iA_BACKLIGHT

Adjusts settings so that the subject does not appear too dark due to backlight.

iA_LOW_PERSON

Allows people to be captured naturally with minimal noise in the overall image.

iA_LOW_MACRO

Records while focusing on a near object even in a dark environment.

Memo

  • Scenes can be detected according to the shooting conditions and automatically adjusted in Intelligent Auto mode.
  • Some functions may not work properly depending on the shooting conditions.
Close

Operation Buttons for Still Image Recording

Operations Still Image Recording
Operation Button Description
num_1

Video/Still Image Mode

Switches between video and still image modes.

num_2

T/W Zoom

Allows the same functions as the zoom lever to be performed.
Camera shake that often occurs when using the zoom lever can be minimized.

num_3

Playback Mode

Switches to the playback mode.

num_4

Snapshot
REC_Still_Image

Functions as the SNAPSHOT button. However, focus cannot be set by pressing halfway.

num_5

MENU

Displays the various menus of still image recording.

num_6

Display Button D-Appear

Switches the display between full ( D-LOCK ) and simple ( D-Appear ) with every tap of the button.

Simple display: Some displays disappear after approximately 3 seconds.

Full display: Displays everything. The display button changes from D-Appear to D-LOCK .

When the power is turned off, simple display ( D-Appear ) will be set.

num_7

Recording Mode iA / MANUAL_MODE

Switches the recording mode.

Close

Using the Silent Mode

When the Silent mode is used, the LCD monitor darkens and operation sounds will not be output. Use this mode to record quietly in dark places such as during a performance.

C2C_SILENT

Press and hold the SILENT button to turn on the Silent mode. To turn it off, press and hold the button again.

SILENT appears when “SILENT MODE” is set to “ON”.

Close

Useful Settings for Recording

When “QUICK RESTART” is set to “ON”, this unit turns on immediately if you open the LCD monitor within 5 minutes after the power is turned off by closing the monitor.

When “AUTO POWER OFF” is set to “ON”, this unit turns itself off automatically to conserve power when it is not operated for 5 minutes. (only when using the battery pack)

When “TOUCH PRIORITY AE/AF” is set to “FACE TRACKING”, this unit detects faces and automatically adjusts its brightness and focus to record the faces more clearly.

Close

Caution

  • Do not expose the lens to direct sunlight.
  • Do not use this unit in the rain, snow, or places with high humidity like the bathroom.
  • Do not use this unit in places subject to excessive humidity or dust, as well as places exposed to steam or smoke directly.
  • While this unit may be used with the LCD monitor reversed and closed, the temperature rises more easily. Leave the LCD monitor open when using this unit in places exposed to direct sunlight or high temperatures.
  • The power may turn off to protect the circuit if the temperature of this unit rises too much.
  • Do not remove the battery pack, AC adapter, or SD card when the access lamp is lighted. The recorded data may become unreadable.
  • This unit is a microcomputer-controlled device. Electrostatic discharge, external noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such a case, turn off the power, then remove the AC adapter and battery pack. This unit will be reset.

Memo

  • Before recording an important scene, it is recommended to conduct a trial recording.
  • Depending on the shooting conditions, the four corners of the screen may appear dark, but this is not a malfunction. In this case, change the shooting conditions by moving the zoom lever, etc.