• home
  • Recording
  • Registering Human Face Personal Authentication Information

Registering Human Face Personal Authentication Information

By registering the face of a person beforehand, focus and brightness can be adjusted automatically by the face tracking function. Up to 6 faces, together with names and priority levels, can be registered.

It is recommended to register the faces that are often being recorded by this camera beforehand.

Open the LCD monitor.

C4B5 Monitor Open Movie

Set the recording mode to either MOVIE video or PHOTO still image.

To switch the mode between video and still image, tap MOVIE or PHOTO on the recording screen to display the mode switching screen.
Tap MOVIE or PHOTO to switch the mode to video or still image respectively.

Tap “MENU”.

C4B5 Tap MENU

The top menu appears.

Tap “SETUP”.

C5B Top Menu(WiFi)

Tap “FACE REGISTRATION”.

C4G3 SETUP FACE REGISTRATION

Tap batsu to exit the menu.

Tap RETURN to return to the previous screen.

Tap “REGISTER NEW FACE”.

C5B REGISTER NEW FACE

Point the camera toward the human subject.

REGISTER NEW FACE1

Information is collected before face registration recording. The frame appears blinking while information is being collected.

Adjust to fit the face within the frame while it is blinking. The frame stops blinking and lights up after information collection is complete.

To cancel the registration, tap “STOP”.
When “CANCEL FACE RECOGNITION?” appears, tap “YES” to return to the normal recording mode.

Tap “RECORD” and record the face from the front.

REGISTER NEW FACE2

A face is captured to be used on the face registration index screen.

A sound can be heard when recording is complete.

To cancel the registration, tap “STOP”.
When “CANCEL FACE RECOGNITION?” appears, tap “YES” to return to the normal recording mode.

Tap “YES” to continue recording.

REGISTER NEW FACE3

To proceed to collect face information in the four directions of up, down, left, and right, tap “YES”. It is recommended to continue recording to increase the accuracy of face recognition.

To end face registration recording, tap “NO”. Go to step 11.

Rotate the face slowly in four directions to register the face information.

REGISTER NEW FACE4

Rotate the face slowly while looking at the camera. A sound can be heard when recording is complete for each direction. (4 times in total)
Repeat the step until recording (registration) is complete for all directions.

Registration of the four directions may fail depending on the shooting environment. In this case, tap “STOP” to cancel recording, then tap “NO” and go to step 11.

If the face cannot be properly recognized during recording, register the face again.

Face the camera with a smiling face.

REGISTER NEW FACE5

Recording starts automatically. Using the smile % display as a reference, smile such that the value is as high as possible.

A sound can be heard when recording is complete.

To cancel recording of smiling face and proceed to enter a name, tap “STOP”, then tap “NO” and go to step 11.

Tap “OK”.

REGISTER NEW FACE6

Tapping “OK” registers the recorded face and the screen for entering a name appears.

To cancel the registration, tap “STOP”.
When “CANCEL FACE RECOGNITION?” appears, tap “YES” to return to the normal recording mode.

Tap on the on-screen keyboard to enter a name, then tap “REG.”.

REGISTER NEW FACE7

Tap “DELETE” to delete a character.

Tap “CANCEL” to exit.

Tap “A/a/1” to select character input type from upper case letter, lower case letter, and number.

Tap LEFT or RIGHT to move one space to the left or right.

Up to 8 characters can be entered.

How to input characters
Example: To enter “KEN”
Tap “JKL” 2 times RIGHT Tap “DEF” 2 times RIGHT Tap “MNO” 2 times

Tap the desired priority level, then tap “REG.”.

REGISTER NEW FACE8

Upon registration, the last number is assigned as the priority level. During face detection, the subject with the highest priority (lowest number) will be detected.

You can change the priority level of a subject by tapping on the number.
Example: To change the priority level of number 3 to number 1, tap number 1. The priority level of the registered subject becomes number 1, while the priority levels of the original number 1 and the ones below drop by one place. (In this example, the original number 1 becomes number 2, and the orignal number 2 becomes number 3.)

When “REG.” is tapped, the registration complete screen appears.

REGISTER NEW FACE9

Tap “OK” to complete the registration.

You can edit registered face information in “EDIT”.

Memo

Faces may not be registered correctly in the following cases:
- when the face appears either too small or too large compared to the frame
- when it is too dark or too bright
- when the face appears horizontal or slanted
- when a part of the face is hidden
- when there are multiple faces within the frame

To increase the accuracy of face recognition, fit only one face within the frame and register in a bright environment.

Faces may not be recognized correctly depending on the shooting conditions and environment. In this case, register the face again.

Faces may not be recognized correctly during recording if the face recognition level is low. In this case, register the face again.

Face tracking and name display may not work properly depending on the registered faces, shooting conditions (distance, angle, brightness, etc.), and expressions.

Face tracking and name display may not work properly for people with similar facial features, such as siblings, parents, children, etc.