-
- Recording
- Registering Human Face Personal Authentication Information
-
Setting SMILE%/NAME DISPLAY
Setting SMILE%/NAME DISPLAY
“SMILE%/NAME DISPLAY” allows you to set the items to display when faces are detected.
Open the LCD monitor.
Set the recording mode to either 
video or 
still image.
To switch the mode between video and still image, tap or on the recording screen to display the mode switching screen.
Tap or to switch the mode to video or still image respectively.
Tap “MENU”.
Tap “RECORD SETTING”. (Go to step 4.)
Alternatively, tap “SMILE%/NAME DISPLAY” in the shortcut menu. (Go to step 5.)
_UJDCILympypskr.png)
Tap “SMILE%/NAME DISPLAY”.
If the icon is not displayed on the screen, tap 
to scroll the screen.
Tap the desired setting.
Setting
|
Details
|
|---|---|
|
OFF |
Displays only the frames when faces are detected. |
|
ON |
Displays the frames, names, and smile levels (%) when faces are detected. |
Frame: Appears around detected faces.
Name: Appears for faces that are registered.
Smile level: Appears in value (0 % - 100 %) for detected smiles.
Memo
The camera is able to detect up to 8 faces. Smile levels (%) will be displayed for up to 3 of the largest faces displayed on the screen.
Some faces may not be detected depending on the shooting environment.
You can register personal authentication information like face, name, and priority level of person before recording.
Up to 3 registered names will be displayed according to the priority level.