Using Wi-Fi by Creating a QR Code
INDOOR MONITORING

INDOOR MONITORING

Setting (Once setting is done, start from the “Regular Operation” below)

1Create a QR code.

Enter values in the required items for indoor monitoring.

Password: set a password to connect this camera to the device via an access point. (Not more than 8 characters)

HTTP Port: Normally set to “80”.

2Display the screen for reading the QR code.

1
2
3
4
5
6

Tap “MENU”.
(Operation on this camera)

The top menu appears.

Tap the “Wi-Fi” ( ) icon.
(Operation on this camera)

C3B_TOP_MENU(Wi-Fi)

Tap on the lower right of the screen.
(Operation on this camera)

C3-Wi-Fi_MENU_1

Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)

C3-Wi-Fi_MENU_2

Tap “SET FROM QR CODE”.

C3_WiFi_COMMON-SET_QRCORD

Tap “EXECUTE”.

C3_WiFi_QR_CORD_SET_USERGUIDE

3Read a QR code.

1
2
3

Read a QR code.
(Operation on this camera)

C3_WiFi_COMMON-SET_READ_QRCORD

Tap “YES”.

C3_WiFi QR_CORD INDOOR OVERWRITTEN

Tap “OK”.

C3_WiFi_QR_CORD_SETTING_DONE

Tap “NEXT” to return to the screen to read the QR code.

Set contents are saved.

4Registering the access points (wireless LAN router) to this unit

Wi-Fi Protected Setup (WPS) Registration

1
2
3
4
5
6
7
8
9

Tap “MENU”.
(Operation on this camera)

The top menu appears.

Tap the “Wi-Fi” ( ) icon.
(Operation on this camera)

C3B_TOP_MENU(Wi-Fi)

Tap on the lower right of the screen.
(Operation on this camera)

C3-Wi-Fi_MENU_1

Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)

C3-Wi-Fi_MENU_2

Tap “ACCESS POINTS”.
(Operation on this camera)

C3_WiFi COMMON-SET ACCESSPOINT

Tap “ADD”.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD

Tap “EZ REGISTRATION WPS”.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD_WPS

Activate WPS of the access point (wireless LAN router) within 2 minutes.

To activate WPS, refer to the instruction manual of the device in use.

After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)

WiFi_ACCESS POINTS_ADD_WPS2

Search the access point, and select from the list.

Set the name (SSID) of the access point (wireless LAN router) and the password beforehand.

1
2
3
4
5
6
7
8
9
10

Tap “MENU”.
(Operation on this camera)

The top menu appears.

Tap the “Wi-Fi” ( ) icon.
(Operation on this camera)

C3B_TOP_MENU(Wi-Fi)

Tap on the lower right of the screen.
(Operation on this camera)

C3-Wi-Fi_MENU_1

Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)

C3-Wi-Fi_MENU_2

Tap “ACCESS POINTS”.
(Operation on this camera)

C3_WiFi COMMON-SET ACCESSPOINT

Tap “ADD”.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD

Tap “SEARCH”.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD_S1

The search results appear on the camera’s screen.

Tap the name (SSID) of the desired access point from the list of search results.
(Operation on this camera)

C2-WiFi_ACCESS POINTS_ADD_S2

Register a password.
(Operation on this camera)

C2-WiFi_Passwardx8

Tap on the on-screen keyboard to enter characters. The character changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice, or “C” by tapping 3 times.

Tap “DELETE” to delete a character.

Tap “CANCEL” to exit.

Tap “A/a/1” to select character input type from upper case letter, lower case letter, and number.

Tap LEFT or RIGHT to move one space to the left or right.

The password is not required if the wireless LAN router is not security protected.

After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)

WiFi_ACCESS POINTS_ADD_WPS2

Other methods, such as “Manual Registration” and “WPS PIN Registration” are also available. Refer to the following link for details.

Registering the Access Points of the Camera to Connect (ACCESS POINTS)

5Connecting the smartphone (or computer) to the access point (wireless LAN router)

Connect the smartphone (or computer) to the access point (wireless LAN router) at home.

This setting is unnecessary if the smartphone (or computer) has already been connected to the access point (wireless LAN router) at home.

Regular Operation

6Monitoring the images by connecting the smartphone and the camera

Operation on this camera

1
2
3
4
5
6

Tap “MENU”.
(Operation on this camera)

The top menu appears.

Tap the “Wi-Fi” ( ) icon.
(Operation on this camera)

C3B_TOP_MENU(Wi-Fi)

Tap “INDOOR MONITORING” ( ).
(Operation on this camera)

C3-Wi-Fi_MENU_1

Tap “START” ( ).
(Operation on this camera)

C3-WiFi_I-MONITOR

Start making a connection.
(Operation on this camera)

C3_WiFi_I-MONITOR_CONNECT_STOP

Name (SSID) of the access point (wireless LAN router) in connection is displayed.

The following is displayed when the camera is connected to the access point.

C3-Wi-Fi_Screen_Wi-Fi

Tap “URL” to display the URL required for connecting the camera from browser.

Operation on the smartphone

Memo

Prior to use this function, a smartphone application needs to be installed on the smartphone.

Installing Smartphone Applications

1
2
3

Start “Everio sync. 2” on the smartphone after setting “INDOOR MONITORING”.

Tap “START” in INDOOR MONITORING on the camera to start.

Tap “INDOOR MONITORING”.

Everio Sync.2-1

The recording screen is displayed.

Appli Android Top1

How to operate from a smartphone

Using Smartphone Applications

Monitoring from the computer (Windows7)

1
2
3
4

Tap the URL button shown on the camera’s screen.
(displayed when the computer and the camera are connected wirelessly.)

C3-Wi-Fi_Screen_Wi-Fi

The URL for the computer to connect to appears.

Check the URL displayed on the camera screen, which starts from “http://”.

C3_WiFi_NETWORK_INFO

After checking the URL, tap “QUIT” to return to the previous screen.

Start Internet Explorer (web browser) on the computer and enter the URL.

Internet explorer

Log in with your username and password.

The username is “everio” and the default password is “0000”.

Changing the Settings

Operations from the Web browser

Using the Wi-Fi Function from a Web Browser