DLA-25LTD / DLA-NZ9 / DLA-NZ8 / DLA-NZ7 / DLA-NP5 / DLA-RS4100 / DLA-RS3100 / DLA-RS2100 / DLA-RS1100 Mobile User Guide

Message	Description	Action
	No device is connected to the input terminal. The input terminal is connected but there is no signal.	Input the video signals.
	The video signal input is not supported on this unit.	Input video signals that can be used. (LINK)
	Indicates that the lamp needs to be replaced soon. To clear the message, press the [BACK] button on the operation panel of the projector unit or the remote control.	Get ready a new lamp unit and replace as soon as possible. Reset the lamp time after replacing the lamp. (LINK, LINK)