Recording |
Using the Control Dial for Recording |
You can use the control dial to change the settings for “FOCUS”, “BRIGHTNESS ADJUST”, “SHUTTER SPEED”, “APERTURE PRIORITY”, “WHITE BALANCE”, and “PARALLAX ADJUSTMENT”.
- 1
- 2
- 3
- 4
Press the ADJ button for about 3 seconds to display the control menu.
A menu screen containing the functions that can adjusted by the control dial is displayed.
Select the function with the control dial.
For details on setting the items and values of each function, refer to the following.
BRIGHTNESS ADJUST
FOCUS
SHUTTER SPEED
APERTURE PRIORITY
WHITE BALANCE
PARALLAX ADJUSTMENT
CLEAR
Select this to set all values adjusted by the ADJ button to “AUTO”.
Press the ADJ button.
The setting screen for the selected function appears.
Adjust the assigned function and record.
Change the setting using the control dial.
Press the ADJ button to set to “AUTO” or activate an assigned function.
To change the setting of a different function, press the ADJ button for about 3 seconds. The control menu appears. Go back to step 2 and select a different function.
Memo
- By assigning “BRIGHTNESS ADJUST”, “FOCUS”, “SHUTTER SPEED”, or “APERTURE PRIORITY” to the control dial, you can adjust the function while recording.
- Only one function can be operated by the control dial. The settings of all other functions will remain unchanged. (Example: When focus is being adjusted, the settings of brightness and shutter speed remain unchanged.)
- When “CLEAR” is selected, all values adjusted by the ADJ button will be set to “AUTO”.
(Exits the control menu.)
Caution
- Settings cannot be changed by tapping on the screen while the control dial is being used. Change the setting with the control dial.(except PARALLAX ADJUSTMENT)
- When “3D VIDEO REC FORMAT” is set to “MP4(MVC)” and recording is performed together with HDMI output, the control menu will not be displayed.