Using Wi-Fi
Image Monitoring via the Internet (OUTDOOR MONITORING)

Image Monitoring via the Internet ( OUTDOOR MONITORING )

You can check the image on the camera via internet connection with a smartphone (or computer).

* To use this function, it is necessary to prepare for an UPnP (Universal Plug and Play) compatible wireless LAN router, and an internet connection from which the global IP address can be obtained.

Recording of videos and still images may be performed while monitoring.

Setting Multiple Cameras in the Same Network

To set up multiple cameras, you need to fix the HTTP ports for each of the cameras.

What You Need

Smartphone or Windows computer

Wireless LAN router that supports UPnP (use a product that has a Wi-Fi certification logo)

To check whether UPnP is supported, please refer to the instruction manual of the wireless LAN router in use.

Internet connection with an obtainable global IP address

* Global IP address is an IP address that is specific in all over the internet. For more information, contact your internet service provider.

Memo

Depending on the wireless LAN router in use and signal strength, you may experience connection problems or slow connections.

When zooming is operated by using the smartphone or computer, it may take longer for responses as compared to the manual operations.

Setting (Once setting is done, start from the “Operation Method” below)

1Obtaining a Dynamic DNS (DDNS) Account

By obtaining a dynamic DNS account, this unit may be used on the web as usual even if the IP address changes when making an access to this unit via internet.

Only the JVC dynamic DNS service can be set on this camera.

To obtain (register) an account, perform the following steps.

Access the following URL from a browser and register for an account.
(Operation on a computer or smartphone)

https://dd3.jvckenwood.com/user/

Set your e-mail address as the username.

Check that you have received a confirmation e-mail to the address used in registration, and access the URL stated in the e-mail.
(Operation on a computer or smartphone)

Set the username and password used in registration on the camera.
(Operation on this camera)

Generate the QR code, and register the username and password to the camera.

Execute OUTDOOR MONITORING.
(Operation on this camera)

If “OUTDOOR MONITORING” is executed while dynamic DNS settings are enabled, the camera will access the dynamic DNS server.

Tap “CAMERA NETWORK INFO.” to check that the URL (WAN) is displayed.
(Registration complete)

Caution

Registration will be canceled if you do not access the dynamic DNS server from the camera within 3 days.
Perform the registration again in this case.

Registration will not be complete if the username and password set on this camera are incorrect. Be sure to check that they are correct.

Successful registration will be canceled too if you do not access the dynamic DNS server for 1 year.

2Creating a QR Code

Enter values in the required items for outdoor monitoring.

For details, refer to OUTDOOR MONITORING .

3Registering the access points (wireless LAN router) to this unit

Wi-Fi Protected Setup (WPS) Registration

Tap “MENU”.
(Operation on this camera)

The top menu appears.

Tap the “Wi-Fi” ( ) icon.
(Operation on this camera)

Tap “Wi-Fi SETTING”.
(Operation on this camera)

Tap “ACCESS POINTS”.
(Operation on this camera)

Tap “ADD”.
(Operation on this camera)

Tap “EZ REGISTRATION WPS”.
(Operation on this camera)

Activate WPS of the access point (wireless LAN router) within 2 minutes.

To activate WPS, refer to the instruction manual of the device in use.

After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)

The following registration methods are also available.

Registering Access Point Using WPS PIN

Registering Access Point Manually

Operation Method

4Connecting the Camera to the Smartphone

Tap “MENU”.
(Operation on this camera)

The top menu appears.

Tap the “Wi-Fi” ( ) icon.
(Operation on this camera)

Tap “ACCESS POINT CONNECTION”.
(Operation on this camera)

The following is displayed when the camera is connected to the access point.

Tapping “INFO.” displays the URL (WAN) for connecting the smartphone.
(Does not appear if DDNS is not set or set incorrectly.)

“ batsu UPnP” is displayed when UPnP cannot be used.

Operation on the smartphone

Memo

Prior to use this function, a smartphone application needs to be installed on the smartphone.

Installing Smartphone Applications

Start “Everio sync. 3” on the smartphone after setting OUTDOOR MONITORING.

Tap “START” in OUTDOOR MONITORING on the camera to start.

Tap “OUTDOOR MONITORING”.

Set the URL.

It is necessary to set the URL when you are using this feature for the first time. Enter the URL displayed on the camera.

If this screen is displayed after the URL has been set, check the connection status of the internet or the camera settings.

Log in with your username and password.
(if authentication cannot be achieved)

The username is “everio” and the default password is “0000”.

To change the password, it is necessary to generate a QR code.

Creating a QR Code

The recording screen is displayed.

Operate from a smartphone

How to operate from a smartphone

Using Smartphone Applications

Image Monitoring via the Internet ( OUTDOOR MONITORING )

Setting Multiple Cameras in the Same Network

What You Need

Memo

Setting (Once setting is done, start from the “Operation Method” below)

1Obtaining a Dynamic DNS (DDNS) Account

Access the following URL from a browser and register for an account.
(Operation on a computer or smartphone)

Check that you have received a confirmation e-mail to the address used in registration, and access the URL stated in the e-mail.
(Operation on a computer or smartphone)

Set the username and password used in registration on the camera.
(Operation on this camera)

Execute OUTDOOR MONITORING.
(Operation on this camera)