> Audio / Phone > Audio operation
Audio operation
Wearing
Identify the L and R sides of the earphones and put them on correctly.
There is a semicircle raised bump on the L (left) side.
Left: Bump
Hold the earphones as shown in the diagram and fit them into your ears.
Insert the earphones with the logo in the horizontal position. Rotate the earphones and adjust to the most comfortable angle.
The medium-size silicone ear pieces are attached when purchased.
Choose an appropriate ear piece from the five sizes (S, MS, M, ML and L) to enhance your listening experience and for the best fit.
Incorrect ear piece size can result in sound leakage and lack of bass.
Check that the ear piece is securely attached as shown in the figure.
If the ear piece is not securely attached, it may slipped off when in use and remain in your ear. If the ear piece remains in your ear, be careful not to push it further into your ear.
Operating the remote control
Launch the music player app on the BLUETOOTH device connected, to start playback.
Operate the touch sensor area with the earphones in your ears.
1x
1x
2x
2x
3x
3x
4x
Touch sensor area
Toggling on/off the ambient sound function
Toggling on/off the noise canceling function
Play/Pause (
)
Tap the touch sensor area on the L earphone once quickly.
Toggling on/off the ambient sound function (Touch & Talk function)
Tap the touch sensor area on the R earphone once quickly.
When the ambient sound function is used, the volume of the music playback will decrease and ambient sounds can be heard more easily with the built-in microphone.
When the noise canceling function is turned on, one quick tap on the R touch sensor area switches between the noise canceling function and the ambient sound function.
Volume adjustment (
/
)
To raise the volume, tap the touch sensor area on the L earphone 3 times quickly.
To lower the volume, tap the touch sensor area on the L earphone twice quickly.
To continue raising the volume, tap the touch sensor area on the L earphone twice quickly and continue to hold.
To continue lowering the volume, tap the touch sensor area on the L earphone once quickly and continue to hold.
Skip to the next track (
)
During playback, tap the touch sensor area on the R earphone twice quickly.
Skip to the previous track or beginning of the current track (
)
During playback tap the touch sensor area on the R earphone 3 times quickly.
Toggling on/off the noise canceling function
Tap the touch sensor area on the L earphone 4 times quickly.
Using the noise canceling function mainly helps to reduce ambient noises such as noise in a vehicle and noise from air conditioners in a room.
You will hear an audio guidance when the function is turned on/off.
The noise canceling function is set to on during factory default.
Remote control operation (when using only the L earphone)
If one earphone is placed on the table with the wear sensor facing down while the power is turned on, the system will erroneously detect that both earphones are worn. The remote control operation for using only one earphone may not work then. If you are not using the earphone, put it in the charging case. Wear sensors
Launch the music player app on the BLUETOOTH device connected, to start playback.
Operate the touch sensor area with the earphones in your ears.
1x
2x
3x
Touch sensor area
Play/Pause ()
Tap the touch sensor area on the L earphone once quickly.
Volume adjustment (/)
To raise the volume, tap the touch sensor area on the L earphone 3 times quickly.
To lower the volume, tap the touch sensor area on the L earphone twice quickly.
To continue raising the volume, tap the touch sensor area on the L earphone twice quickly and continue to hold.
To continue lowering the volume, tap the touch sensor area on the L earphone once quickly and continue to hold.
Remote control operation (when using only the R earphone)
If one earphone is placed on the table with the wear sensor facing down while the power is turned on, the system will erroneously detect that both earphones are worn. The remote control operation for using only one earphone may not work then. If you are not using the earphone, put it in the charging case. Wear sensors
Launch the music player app on the BLUETOOTH device connected, to start playback.
Operate the touch sensor area with the earphones in your ears.
1x
2x
3x
Touch sensor area
Play/Pause ()
Tap the touch sensor area on the R earphone once quickly.
Volume adjustment (/)
To raise the volume, tap the touch sensor area on the R earphone 3 times quickly.
To lower the volume, tap the touch sensor area on the R earphone twice quickly.
To continue raising the volume, tap the touch sensor area on the R earphone twice quickly and continue to hold.
To continue lowering the volume, tap the touch sensor area on the R earphone once quickly and continue to hold.
The music will return to the original volume when a user quits the ambient sound function. If you have raised the volume while listening to surrounding sounds, take note that the volume will increase when you return to music playback.
The ambient sound function draws surrounding sounds from the built-in microphone. Touching the microphone hole allows you to hear a noise. Take note not to touch or cover the microphone hole accidentally when operating the earphone.
Microphone hole
Toggling of the ambient sound function and the noise canceling function only works when the earphones are connected to the BLUETOOTH device.
The noise canceling function is effective for low-pitched sounds such as noise in a vehicle and noise from air conditioners in a room but less effective for relatively high-pitched sounds such as announcements, conversations and bells in vehicles.
When the remaining battery power becomes low, the audio guidance will be heard from the earphone.
When watching movies with the earphones, a slight time lag may occur in the audio output.
We do not guarantee all operations of the BLUETOOTH device.