> Charging > Charging the charging case

Charging the charging case

When using a commercially available USB conversion AC adapter, make sure to choose one with an output voltage of DC 5 V and output current of 1 A and above. Otherwise, it may result in malfunction or abnormal heating.

Use only the supplied charging cable for charging.

Using the supplied charging cable, connect the charging case and a commercially available USB conversion adapter.

1Connect the charging cable provided to start charging.

Insert the USB AC adapter into the AC outlet to start charging.

charging_2_No-PC_charge_FW1000T_U + Charge 2 FW1000T_U

5V TYPE

The indicators flash and light up, indicating that charging has started.

The charging time for the charging case is approx. 2.5 hours.

Indicators on the charging case

case_lamp_FW1000T_U + Case lamp FW1000T_U

Indicators

indicator_XC50T

During charging, the indicators light up and flash. When charging is complete, all indicators will light up.

After charging is complete, unplug the USB charging cable.

The charging case may stop charging if the temperature exceeds the charging temperature range (5 °C (41 °F) to 35 °C (95 °F)). (All the indicators on the charging case will turn off.) Charging will resume automatically in an environment where the temperature is back within the charging temperature range.

To prevent deterioration of the battery, charge the charging case once every 6 months when it has not been used for a long period of time.

When charging the charging case that has not been used for a long period of time, it might take some time for the indicators to light up or flash. Wait for the indicators to light up or flash.