Specifications
TOP|
Product Name |
D-ILA Projector |
|
|
Model Name |
DLA-Z1 |
|
|
Display Panel/Size |
D-ILA device *1, 2 0.69” 4K D-ILA (4096 x 2160 pixels) x 3 |
|
|
Projection Lens |
2.0 x power zoom lens (1.4:1 to 2.8:1), motorized zoom and focus |
|
|
Light Source |
BLU-Escent (Laser Diode) |
|
|
Screen Size |
Approx. 60” to 280” (Aspect ratio of 16:9) |
|
|
Brightness |
3000 lm |
|
|
Projection Distance |
Refer to LINK. |
|
|
Input Compatibility Signal |
Refer to LINK. |
|
|
Display Resolution |
4096 x 2160 pixels |
|
|
Input Terminal |
HDMI Input |
Dual, HDMI 19-pin x 2 (HDCP 2.2-compatible) *3 |
|
Output Terminal |
Trigger Terminal |
Single, |
|
3D synchro |
Dedicated terminal for 3D Synchro Emitter (single, mini-DIN 3-pin) |
|
|
Control Terminal |
RS-232C Terminal |
Single, D-sub 9-pin (male) (external control) |
|
LAN Terminal |
Single, RJ45 jack, 10BASE-T/100BASE-TX |
|
|
Service Terminal |
SERVICE |
Single (USB Type A) *4 |
|
Power Requirements |
AC 100 V to 240 V, 50 Hz/60 Hz |
|
|
Power Consumption |
750 W (during normal standby: 1.5 W *5, during Eco Mode standby: 0.4 W *6) |
|
|
Operation Environment |
Temperature: 5 |
|
|
Installation Height |
Below 6,561 ft (2,000 m) |
|
|
Dimensions (Width x Height x Depth) |
500 mm x 235 mm x 720 mm (including feet) |
|
|
Mass |
37.5 k |
|
|
Accessories |
Refer to LINK. |
|
3.5 mm DC Power Jack ( 
)
C to 35 
D-ILA is the abbreviation for Direct Drive Image Light Amplifier.
D-ILA devices are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%. Only 0.01% or less of the pixels are either missing or would remain permanently lit.
HDCP is the abbreviation for High-bandwidth Digital Content Protection system. The image of the HDMI input terminal may not be displayed in some cases due to changes in the HDCP specifications.
Exclusively for firmware update.
The power consumption of this product during networked standby when all wired network ports are connected is 1.5 W.
“During standby” refers to Eco Mode standby (LINK).
Design and specifications are subject to change without prior notice.
Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order to aid comprehension. Images may differ from the actual product.
This unit has obtained the “THX 4K DISPLAY Certification” determined by THX Ltd.
In addition to 2K content, you can also enjoy faithful reproduction of images in a quality as intended by the filmmaker during playback of 4K content.
The THX 4K DISPLAY certification is “an indication of high definition and high resolution”, which is granted to products that have cleared more than 400 image quality tests.
This unit is isf-certified, so calibration can be performed by an isf-certified trainer.
After calibration is performed, an isf mode is added to the Picture mode.
For more details, please refer to the isf website.
Picture Adjust
Input Signal
Installation
Display Setup
Function
Information