Powering off the Headphones

Press and hold the power button of the headphones for approximately 3 seconds.

Doing so turns off the power of the headphones, and the processor unit also powers off automatically.

Turn off the power of the processor unit

Press the power button of the processor unit once. Doing so turns off the power of the processor unit, followed by that of the headphones.

The processor unit will be placed in the auto standby mode (no wireless transmission mode).

The [AUTO] power indicator lights up in orange, while the [STANDBY] power indicator lights up in red.

If the [HDMI CEC] switch on the bottom surface is set to “ON”, the power of the processor unit may enter the auto standby mode in tandem with the power of the connected TV, player and other devices.

If there is no input for 30 minutes, the processor unit automatically enters the auto standby mode. (Auto power off)

About the Auto Standby and Standby Modes

When turning off the power of the processor unit, pressing the power button once places it in the auto standby mode. Even when the power of the processor unit is not turned on, video images and audio of the playback device will be output from the TV. Under normal circumstances, choose to use the auto standby mode when turning off the power of the processor unit.

When turning off the power of the processor unit, pressing and holding the power button places it in the standby mode. Video images and audio from the playback device are not output from the TV in the standby mode.