Specifications
TOP|
Product Name |
D-ILA Projector |
|
|
Model Name |
DLA-RS640, DLA-RS540, DLA-RS440 |
|
|
Display Panel/Size |
D-ILA device *1, 2 0.7" (1920 x 1080 pixels) x 3 (total no. of pixels: approx. 6.22 million) |
|
|
Projection Lens |
2.0 x power zoom lens (1.4:1 to 2.8:1), motorized zoom and focus |
|
|
Light-source Lamp |
265 W ultra-high pressure mercury lamp [product no.: PK-L2615U] |
|
|
Screen Size |
Approx. 60" to 200" (Aspect ratio of 16:9) |
|
|
Brightness |
2000 lm |
|
|
Projection Distance |
Refer to LINK. |
|
|
Input Compatibility Signal |
Refer to LINK. |
|
|
Display Resolution |
3840 x 2160 pixels *3 |
|
|
Input Terminal |
HDMI Input |
Dual, HDMI 19-pin x 2 (HDCP 2.2-compatible) *4 |
|
Output Terminal |
Trigger Terminal |
1 system, |
|
3D synchro |
Dedicated terminal for 3D Synchro Emitter (1 system, mini-DIN 3-pin) |
|
|
Control Terminal |
RS-232C Terminal |
1 system, D-sub 9-pin (male) (external control) |
|
LAN Terminal |
1 system, RJ-45 plug |
|
|
Power Requirements |
AC 100 V to 240 V, 50 Hz/60 Hz |
|
|
Power Consumption |
380 W (during networked standby: 1.5 W *5, during standby: 0.4 W *6) |
|
|
Operation Environment |
Temperature: 5 |
|
|
Installation Height |
Below 5,000 ft (1524 m) |
|
|
Dimensions (Width x Height x Depth) |
Approx. 455 mm x 179 mm x 472 mm (excluding feet and protrusions) |
|
|
Mass |
15.6 k |
|
|
Accessories |
Refer to LINK. |
|
3.5 mm DC Power Jack ( 
)
C to 35 
( D-ILA is the abbreviation for Direct drive Image Light Amplifier.
D-ILA devices are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%. Only 0.01% or less of the pixels are either missing or would remain permanently lit.
During 3D playback, the pixel is set to 1920 x 1080.
HDCP is the abbreviation for High-bandwidth Digital Content Protection system. The image of the HDMI input terminal may not be displayed in some cases due to changes in the HDCP specifications.
The power consumption of this product during networked standby when all wired network ports are connected is 1.5 W.
“During standby” refers to Eco Mode standby (LINK).
Design and specifications are subject to change without prior notice.
Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order to aid comprehension. Images may differ from the actual product.
have obtained the “THX 3D Display Certification” by THX.
In addition to 2D movies, you can also enjoy faithful reproduction of images in a “quality as intended by the filmmaker” during playback of 3D movies.
The THX 3D certification is “an indication of high definition and high resolution”, which is granted to products that have cleared more than 400 image quality tests.
are isf-certified, so calibration can be performed by an isf-certified trainer.
After calibration is performed, an isf mode is added to the Picture mode.
For more details, please refer to the isf website.