Installation
TOP
Focus / Zoom / Shift
For adjusting the lens according to the projection position
Image Pattern
|
Setting |
Description |
|---|---|
|
On |
Displays the lens adjustment pattern. |
|
Off |
Displays external signals, and does not display the lens adjustment pattern. |
Lock
|
Setting |
Description |
|---|---|
|
On |
Locks the lens to prevent any erroneous operation on the adjustments. When “On” is selected, all lens control functions other than “Lens Memory Select” cannot be operated. |
|
Off |
Does not lock the lens. |
Lens Memory Select / Lens Memory Save / Lens Memory Name Edit
The Focus, Zoom, and Shift settings can be saved or retrieved, so you can switch easily to a different aspect ratio (screen size) according to the image.
Lens Center
Returns the lens position to the center.
Lens Cover 
|
Setting |
Description |
|---|---|
|
Auto |
Opens/closes the lens cover according to the power on/off operation. |
|
Open |
Leaves the lens cover open regardless of the power on/off mode. |
Adjust
For setting the adjustment feature to On (Memory 1 or Memory 2) or Off.
You can save the settings separately when an anamorphic lens is used and when you are using the projector with a screen.
Adjust Area
|
Setting |
Description |
|---|---|
|
Whole |
Adjusts the entire image. |
|
Zone |
Enables fine adjustment of each zone by dividing the screen into 11 vertical x 11 horizontal zones. |
Adjust Color
For selecting the color to adjust (“Red” or “Blue”).
Adjust Pattern Color
For setting the color of the adjustment pattern displayed during adjustment to “White” or “Yellow / Cyan”.
Adjust (Pixel)
When “Adjust Area” is set to “Whole”, adjustment can be made by moving in units of one pixel on the screen of the color selected in “Adjust Color”.
Adjustment cannot be made when “Adjust Area” is set to “Zone”.
|
Setting |
Description |
|---|---|
|
H (Horizontal) |
Setting range: -2 (moves red/blue to the left) to +2 (moves red/blue to the right) |
|
V (Vertical) |
Setting range: -2 (moves red/blue downward) to +2 (moves red/blue upward) |
Adjust (Fine)
When “Adjust Area” is set to “Whole”, adjustment can be made by moving in units of 1/16 pixel on the screen of the color selected in “Adjust Color”.
When “Adjust Area” is set to “Zone”, the screen is divided into 11 vertical x 11 horizontal zones, and fine adjustment of each zone is possible.
|
Setting |
Description |
|---|---|
|
H (Horizontal) |
Setting range: -31 (moves red/blue to the left) to +31 (moves red/blue to the right) |
|
V (Vertical) |
Setting range: -31 (moves red/blue downward) to +31 (moves red/blue upward) |
Reset
Restores all pixel adjustment data to the factory default.
For setting to “Front”, “Ceiling Mount (F)”, “Rear”, or “Ceiling Mount (R)” according to the installation status of the projector.
“Front” or “Ceiling Mount (F)” is set when projector is installed in the front with respect to the screen.
“Rear” or “Ceiling Mount (R)” is set when projector is installed in the rear with respect to the screen.
For correcting any keystone distortion that occurs when the projector is installed at an angle with respect to the screen.
Vertical setting range: -16 to +16
Increasing the value changes the aspect slightly.
Adjustment cannot be made during 4K 50/60p signal input.
Configure this setting when an anamorphic lens is used.
|
Setting |
Description |
|---|---|
|
A |
Projects the 2.35:1 image with it stretched in the vertical direction only. |
|
B |
Projects the 16:9 image with it compressed in the horizontal direction only. |
|
Off |
Projects image without any scaling. |
Set to “On” when using the projector at a location of low atmospheric pressure (higher than 900 m above sea level).
Screen Adjust
By selecting the optimal correction mode according to the characteristics of the screen in use, corrections can be performed to reproduce natural images with balanced colors.
For making general adjustments to slight color fringing in the horizontal/vertical directions of the video image.
The Adjustment mode is activated, and the selected adjustment pattern and Adjustment (Pixel) window are displayed.
] keys to move and adjust the vertical and horizontal pixels of the entire zoneThe adjustment setting appears at the center of the Adjustment (Pixel) window.
Remote Control Operation Guide
|
Button Name |
Description of Operation |
|---|---|
|
[GAMMA] |
Changes “Adjust Color”. |
|
[COLOR TEMP.] |
Switches between “Adjust (Pixel)” and “Adjust (Fine)”. Switches to “Adjust (Pixel)” when “Adjust Area” is set to “Zone”. |
|
[3D FORMAT] |
Changes “Adjust Pattern Color”. |
|
[PIC ADJ.] |
Switches “Adjust Area”. A zone cursor appears on the adjustment pattern when the “Zone” setting is selected. |
For making general adjustments on the misalignment of the entire screen using “Adjust (Pixel)”, followed by making fine adjustments.
The Adjustment mode is activated, and the selected adjustment pattern and Fine window are displayed.
The adjustable range may be smaller depending on the pixels being adjusted on the entire screen.
] keys to move and adjust the vertical and horizontal pixels of the entire zoneThe adjustment setting appears at the center of the Fine window.
If both the maximum overall screen misalignment of H (horizontal direction) and V (vertical direction) are “31”, you cannot select a value that is larger than the displayed setting even when the adjustment setting is lower than the maximum value.
If the minimum overall screen misalignment is “-31”, you cannot select a value that is smaller than the displayed setting even when the adjustment setting is higher than the minimum value.
For fine-tuning misalignments on a part of the screen after adjusting the overall screen misalignment using “Adjust (Pixel)” and “Adjust (Fine)”.
The screen can be divided vertically and horizontally into 10 sections for partial adjustments to be made.
The Adjustment mode is activated, and the selected adjustment pattern and Zone Adjustment window are displayed.
The adjustable range may be smaller depending on the pixels being adjusted on the entire screen.
] keys to move the cursor to the point to be adjusted ] keys to move and adjust the vertical and horizontal pixels of the entire zoneThe adjustment setting appears at the center of the Zone Adjustment window.
