Global
Mobile User Guide

Resetting the Lamp Time

TOP

Reset the lamp time when you have replaced the lamp. It provides an estimated timing for lamp replacement

Resetting the lamp time from the menu screen

Press the [MENU] button to display the menu
Select “Function” arrow “Lamp Reset” from the menu
X900R_Lamp_Reset1
On the “Reset Lamp Time?” screen, select “Yes” and press the [OK] button

The lamp time is reset to zero.

X95R_Lamp_Reset1-2

Resetting the lamp time using the remote control

Insert the power plug into the power outlet
Make sure that you operate the remote control in the Standby mode (the power plug is inserted into the outlet, but the power is not turned on)

Press in the order as shown.

Make sure that you press a button within two seconds after the last button is pressed.
Press the last button for at least two seconds.

X95R_Lamp_Reset2

The “LAMP” indicator and “STANDBY/ON” indicator blink alternately for three seconds. After that, the unit switches to the Standby mode.

MEMO

Reset the lamp time only when you have replaced the lamp.
If the lamp time is reset while a lamp is in use, you may lose track of the timing for replacing the lamp. Doing so may result in using the lamp beyond the estimated limit, thereby causing lamp blowout.

Global
Mobile User Guide
DLA-RS640 / DLA-RS540 / DLA-RS440
Mobile User Guide