Clean the filter regularly Otherwise, the air intake efficiency may deteriorate, and malfunction may occur.
Cleaning and Replacing the Filter
TOPCAUTION
Make sure that you pull out the power plug from the outlet before cleaning or replacing the filter.
Before turning this unit upside down and placing it on the floor or a table, make sure that you lay a soft rag in advance to prevent the projector from being scratched.
Remove the inner filter
Clean the filter
Wash the filter with water and dry it in a shaded area.
If the filter is extremely dirty, clean it with a neutral detergent. Put on rubber gloves when using a neutral detergent.
After washing the filter with water, make sure that it is completely dry before reinstalling. Otherwise, electric shock or malfunction may occur.
Do not clean the filter with a vacuum cleaner or air duster. The filter is soft and may be easily damaged.
Reinstall the inner filter
If the filter is damaged or too dirty to be cleaned
Replace with a new filter. A dirty filter will dirty the internal parts of the unit and cause shadows to appear on the video image.
To purchase a new filter or when there is dirt in the internal parts of the unit, consult your authorized dealer or nearby service center.
Product no.: F1K-0019-00