Input Signal
TOPInput Level
For setting the dynamic range (gradation) of the video input.
If the dynamic range is not appropriate, the bright areas become overexposed, and the dark areas become underexposed.
|
Setting |
Description |
|---|---|
|
Auto |
Sets the input signal level automatically. |
|
Standard |
Select this setting if you are inputting video signals (dynamic range: 16 - 235). |
|
Enhanced |
Select this setting if you are inputting PC signals (dynamic range: 0 - 255). |
|
Super White |
Select this setting when inputting Super White-compatible device signals (dynamic range: 16 - 255). |
When Picture Mode is set to “THX”, the setting is fixed at “Super White”.
Color Space
For setting the color space of the input signal.
|
Setting |
Description |
|---|---|
|
Auto |
Detects “YCbCr(4:4:4)”, “YCbCr(4:2:2)”, and “RGB” automatically. |
|
YCbCr(4:4:4) |
Select this setting when inputting YCbCr(4:4:4) video signals. |
|
YCbCr(4:2:2) |
Select this setting when inputting YCbCr(4:2:2) video signals. |
|
RGB |
Select this setting when inputting RGB video signals. |
The color space setting is YCbCr(4:2:0) during 3840×2160/50 Hz, 3840×2160/60 Hz input.
Control with HDMI (CEC)
For setting the HDMI link function.
Setting to “On” enables this unit to be operated via operation on the connected device, such as power on/off and switching of input.
Aspect
The screen size of the projected image can be adjusted optimally according to the original screen size (aspect) that has been input.
Progressive
For converting the interpolation setting of the interlaced signals.
|
Setting |
Description |
|---|---|
|
Auto |
Performs interpolation by automatically detecting whether the interlaced signals are converted from 24p video images, such as those in film movies, or interlaced signals of video materials. |
|
Off |
Interpolates video images as interlaced signals of video materials, etc. |
Mask
For hiding the peripheral area of the image with a mask (black strip).
|
Setting |
Description |
|---|---|
|
Off |
Not masked. |
|
2.5% |
Masks about 2.5% of the peripheral area of the image. |
|
5% |
Masks about 5.0% of the peripheral area of the image. |
|
Custom |
Masks about 0% to 5% of the four sides of the image. |
3D Setting
For setting 3D movies for viewing.
Picture Position (Horiz./Vert.)
Adjust the position if the edges of the image are partially missing due to the timing of horizontal and vertical synchronization signals.
Adjustment cannot be made during 3D signal input.