Remote Control
TOP
[STAND BY]
Turns off the power. (LINK)
[ON]
Turns on the power. (LINK)
[INPUT]
Select an input from [HDMI 1] and [HDMI 2]. (LINK)
[3D SETTING]
Displays the 3D setting menu. (LINK)
[C.M.D.]
For setting frame interpolation. (LINK)
[INFO.]
Displays the information menu. (LINK)
[ENV.SETTING]
Displays the “Environment Setting” menu, (LINK)
[LENS CONTROL]
For adjusting focus, zoom, and shift. (LINK)
[LENS MEMORY]
Switches between saving, retrieving, and editing of the lens memory. (LINK)
[LENS AP.]
For setting the lens aperture. (LINK)
[MPC]
For setting the MPC level. (LINK)
[P.ANALYZER]
Turns on/off the analysis screen. (LINK)
[BEFORE/AFTER]
Displays the image before or after an effect is applied. This is used for MPC and Color Management.
(LINK, LINK)
[HIDE]
Hides the image temporarily. (LINK)
[LIGHT]
Illuminates the buttons on the remote control.
[ 
] keys
For selecting an item.
[OK]
Confirms a selected item.
[MENU]
Displays the menu,
or hides the menu if it is displayed.
[BACK]
Returns to the previous menu.
[PICTURE MODE]
Switches the Picture mode to [FILM]*, [CINEMA], [ANIME.], [NATURAL], [PHOTO]*, [STAGE], [THX]*, or [USER]. (LINK)
only
[ADVANCED MENU]
Pressing the button each time switches the menu in the following sequence: “Picture Mode” 
“Color Profile” “Color Temp.” “Gamma”
[GAMMA]
For setting the gamma level. (LINK)
[COLOR TEMP.]
For setting the color temperature. (LINK)
[3D FORMAT]
Switches the 3D format. (LINK)
[COLOR P.FILE]
Switches the color profile. (LINK)
[PIC. ADJ.]
Switches the items for adjusting the image quality, such as contrast, brightness, etc. (LINK)