Global
Mobile User Guide

Viewing 3D Movies

TOP

Connect this unit to a 3D-compatible HDMI device, and turn on the power to play back the 3D video image

For details on how to play back 3D video images, please refer to the instruction manual of the player or recorder in use.

When 3D signals are received, the video image switches automatically to the 3D format.

This unit supports the following 3D formats.
- Frame packing
- Side-by-side
- Top-and-bottom

In the default setting, “3D Format” is set to “Auto” for automatic projection of 3D images.

If the image does not switch to 3D automatically

Press the [3D SETTING] button to display “3D Setting”

Select “3D Format”

X500R : Press the [3D FORMAT] button on the remote control

X900R_3D_Play1

Pressing the [3D FORMAT] button each time switches the mode in the following sequence: “Auto” arrow “Side by Side” arrow “Top and Bottom” arrow “2D” arrow “Auto”...

You can also perform setting from “Input Signal” arrow “3D Setting” arrow “3D Format” in the menu.

Format

Description

Auto

The format is detected and configured automatically.

Side by Side

Select this setting if the 3D input signal is of the side-by-side format.

Top and Bottom

Select this setting if the 3D input signal is of the top-and-bottom format.

2D

Select this setting if 2D images are falsely recognized as 3D ones.

Turn of the power of the 3D GLASSES and put them on

The PK-AG1 powers on automatically.

Global
Mobile User Guide
DLA-X900R / DLA-X700R / DLA-X500R / DLA-RS67 / DLA-RS57 / DLA-RS49 / DLA-RS6710 / DLA-RS4910
Mobile User Guide