Do not turn on the power until connection is complete.
Before connecting the cables, turn off the power of each device. Making connection with each device being turned on may cause this unit to malfunction.
Before connecting the cables, remove any static electricity from your body by touching the wall with the palm of your hand.
The connection procedures differ according to the device used. For details, please refer to the instruction manual of the device to be connected.
This projector is used for projecting images. To output the audio of connected devices, please connect a separate audio output device, such as an amplifier or speaker.
Projector has no audio pass through or eARC output.
The images may not be displayed depending on the devices and cables to be connected. When using an HDMI cable (sold separately), make use of one with the Ultra High Speed HDMI Cable certification (supports 48 Gbps).
Also, please refer to HDMI Format Setting.
Some cables cannot be connected to this unit due to the size of their connector cover.
Configuration of a network password is necessary before connecting to the LAN terminal. For details, refer to Network Password.