HDMI Settings | DLA-NZ700 / DLA-NZ500 / DLA-RS2200 / DLA-RS1200 | D-ILA Projector

HDMI 1 Settings / HDMI 2 Settings

Input Level

For setting the dynamic range (gradation) of the video input.
If the image is not displayed properly even after selecting “Auto”, select an appropriate setting.

If the dynamic range is not appropriate, the bright areas become overexposed, and the dark areas become underexposed.

Setting	Description
Auto	Sets the input signal level automatically.
16-235 (Video)	Select this setting if you are inputting video signals (dynamic range: 16 - 235).
0-255 (PC)	Select this setting if you are inputting PC signals (dynamic range: 0 - 255).
16-255 (S.White)	Select this setting when inputting Super White-compatible device signals (dynamic range: 16 - 255).

Color Space

For setting the color space of the input signal.
If the image is not displayed properly even after selecting “Auto”, select an appropriate setting.

Setting	Description
Auto	Detects “YCbCr444”, “YCbCr422”, and “RGB” automatically.
YCbCr444	Select this setting when inputting YCbCr (4:4:4) video signals.
YCbCr422	Select this setting when inputting YCbCr (4:2:2) video signals.
RGB	Select this setting when inputting RGB video signals.

Auto Pic.Mode Select

SDR

For configuring the “Picture Mode” to switch to automatically during input of SDR signal.

Setting	Description
Last Setting	Switches to the “Picture Mode” that was last configured when viewing SDR content.
Natural	Switches the “Picture Mode” automatically to “Natural”.
Cinema	Switches the “Picture Mode” automatically to “Cinema”.
Vivid	Switches the “Picture Mode” automatically to “Vivid”.
SDR 1, SDR 2	Switches the “Picture Mode” automatically to “SDR 1” and “SDR 2”.

HDR10

For configuring the “Picture Mode” to switch to automatically during input of HDR10 signal.

Setting	Description
Last Setting	Switches to the “Picture Mode” that was last configured when viewing HDR10 content.
Frame Adapt HDR 1	Switches the “Picture Mode” automatically to “Frame Adapt HDR 1”.
Frame Adapt HDR 2	Switches the “Picture Mode” automatically to “Frame Adapt HDR 2”.
HDR 1, HDR 2	Switches the “Picture Mode” automatically to “HDR 1” and “HDR 2”.

HDR10+

For configuring whether HDR10+ transmission is allowed. To enjoy HDR10+ content, configure to “On”.

Setting	Description
On	Allows HDR10+ transmission
Off	Prohibits HDR10+ transmission

FILMMAKER MODE

For configuring whether to switch “Picture Mode” automatically to “FILMMAKER MODE” when FILMMAKER MODE is detected.

Setting	Description
Auto	Automatically switches “Picture Mode” to “FILMMAKER MODE” when FILMMAKER MODE is detected.
Manual	Does not automatically switch “Picture Mode” to “FILMMAKER MODE” when FILMMAKER MODE is detected.

Displays a message asking whether to switch “Picture Mode” automatically when FILMMAKER MODE is detected for the first time. If “No” is selected, “FILMMAKER MODE” will be configured to “Manual”. To enable automatic switching, configure “FILMMAKER MODE” to “Auto”.

Content Type

For configuring the type of video content used for selecting an image quality mode.

If the image is not displayed properly even after selecting “Auto”, select an appropriate setting.

Item	Description
Auto	Switches the video type automatically according to the input video system. After switching automatically, the picture mode switches to the setting preconfigured in “Auto Pic.Mode Select”. (Auto Pic.Mode Select)
SDR	Picture mode suitable for viewing SDR content.
HDR10+	Picture mode suitable for viewing HDR10+ content.
HDR10	Picture mode suitable for viewing HDR10 content.
HLG	Picture mode suitable for viewing HLG content.

HDMI Format Setting

For changing the EDID mode of the “HDMI 1/HDMI 2” terminal. Set to “Standard” under normal condition.
The images may not be displayed on some old devices. In this case, try “Option 1” or “Option 2”.

EDID (Extended Display Identification Data) refers to the information, such as supported resolutions, exchanged between devices.

Setting values: Standard, Option 1 and Option 2

HDMI Format Settings and Supported Resolution

Supported Resolution	Color Space	Bit Number	HDMI Format Setting
Supported Resolution	Color Space	Bit Number	Standard	Option 1	Option 2
4K24p 4K30p 4K25p	RGB/YCbCr4:4:4	8 bit	✓	✓	✓
	RGB/YCbCr4:4:4	10, 12 bit	✓	✓	-
	YCbCr4:2:2	12 bit	✓	✓	✓
4K60p 4K50p	YCbCr4:2:0	8 bit	✓	✓	-
	YCbCr4:2:0	10, 12 bit	✓	✓	-
	RGB/YCbCr4:4:4	8 bit	✓	✓	-
	RGB/YCbCr4:4:4	10, 12 bit	✓	-	-
	YCbCr4:2:2	12 bit	✓	✓	-