|
Product Name |
D-ILA Projector |
|
|
Model Name |
DLA-NZ700BK, DLA-NZ700BE, DLA-NZ500BK, DLA-NZ500BE, DLA-NZ500WE, DLA-RS2200K, DLA-RS2200E, DLA-RS1200K, DLA-RS1200E |
|
|
Display Panel/Size |
D-ILA device *1, 2 0.69” 4K D-ILA (4096 x 2160 pixels) x 3 |
|
|
Projection Lens |
1.6 x power zoom lens, motorized zoom and focus |
|
|
Light Source |
Laser Diode |
|
|
Screen Size |
Approx. 60” to 200” (Aspect ratio of 16:9) |
|
|
Brightness |
2300 lm |
|
|
Zoom Ratio |
x 1.6 |
|
|
Throw Ratio |
1.34 to 2.14 (Aspect ratio of 16:9) |
|
|
Projection Distance |
||
|
Input Compatibility Signal |
||
|
Display Resolution |
4096 x 2160 pixels |
|
|
Input Terminal |
HDMI Input |
Dual, HDMI 19-pin x 2 (HDCP 2.3-compatible) *3 |
|
Control Terminal |
LAN Terminal |
Single, RJ45 jack, 10BASE-T/100BASE-TX |
|
Service Terminal |
SERVICE Single (USB Type A) *4 |
|
|
Power Requirements |
AC 100 V to 240 V, 50 Hz/60 Hz |
|
|
Power Consumption |
280 W (during normal standby: 1.5 W *5, during Eco Mode standby: 0.3 W) |
|
|
Operation Environment |
Temperature: 5 |
|
|
Installation Altitude |
Below 6,561 ft (2,000 m) |
|
|
Dimensions (Width x Height x Depth) |
450 mm x 181 mm x 479 mm (17-23/32 in x 7-5/32 in x 18-7/8 in) (including feet) |
|
|
Mass |
14.8 k |
|
|
Accessories |
||
, 2000 lm 
C to 35
(32.6 lb) D-ILA is the abbreviation for Direct Drive Image Light Amplifier.
D-ILA devices are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%. Only 0.01% or less of the pixels are either missing or would remain permanently lit.
HDCP is the abbreviation for High-bandwidth Digital Content Protection system. The image of the HDMI input terminal may not be displayed in some cases due to changes in the HDCP specifications.
For software update and setting backup features.
The power consumption of this product during networked standby when all wired network ports are connected is 1.5 W.
Design and specifications are subject to change without prior notice.
Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order to aid comprehension. Images may differ from the actual product.
This unit has acquired the certification of the “HDR10+” standard set by HDR10 + Technologies, LLC.
Tone mapping is optimally performed for each scene according to the dynamic metadata to faithfully reproduce HDR video images for viewing according to the intentions of the video producer.
HDR10+™ logo is a trademark of HDR10+ Technologies, LLC.
This unit is isf-certified, so calibration can be performed by an isf-certified trainer.
After calibration is performed, an isf mode is added to the Picture mode.
For more details, please refer to the isf website.