Main Page ＞
Copying ＞ Creating Discs with an External Blu-ray Drive ＞ Preparing an External Blu-ray Drive
Copying |
Preparing an External Blu-ray Drive |
Memo
- To use the USB cable provided with the external Blu-ray drive, purchase the USB extension cable.
Mini-A (Male) – A (Female)
(Part number: QAM0852-001)
When connecting to the external Blu-ray drive, use a USB cable with Mini-A (Male) – B (Male) connectors.
The USB cable provided with this unit cannot be used.
Connect the USB cable and the AC adapter.
Turn off the camcorder by pressing the 
button for about 2 seconds.
Connect the USB cable of the external Blu-ray drive to this unit.
Connect the AC adapter of the external Blu-ray drive.
Connect the AC adapter to this unit.
This unit powers on automatically when the AC adapter is connected.
This unit turns on and the “BACK-UP” menu appears.
While the USB cable is connected, the “BACK-UP” menu is displayed.
Refer also to the instruction manual of the external Blu-ray drive.
Insert a new disc.
Press the power button on the external Blu-ray drive to turn on the power.
Press the eject button to open the disc tray.
Pull out the tray completely and load a new disc properly.
Push the disc tray in until it clicks into place.
Caution
- Be sure to turn off the power when connecting the devices.
Otherwise, electric shocks or malfunctions may occur.