Main Page ＞ Copying ＞ Creating Discs with a DVD Writer ＞ Preparing a DVD Writer (CU-VD3)

Copying

Preparing a DVD Writer (CU-VD3)
  • 1
  • 2
  • 3
  • 4

Remove the AC adapter and battery pack from this unit.

Open the LCD monitor.

C2A_Common_Monitor_Open

Connect the USB cable and the AC adapter.

Turn off the camcorder by pressing the POWER_BUTTON button for about 2 seconds.

DVDBurner_CU-VD3
sub_step1
Connect the USB cable of the DVD writer to this unit.
sub_step2
Connect the AC adapter of the DVD writer.

Turn on the DVD writer.

sub_step3
Connect the AC adapter to this unit.

This unit powers on automatically when the AC adapter is connected.

This unit turns on and the “BACK-UP” menu appears.

While the USB cable is connected, the “BACK-UP” menu is displayed.

Refer also to the instruction manual of the DVD writer.

Insert a new disc.

DVD set (CU-VD3)
sub_step1
Press the eject button to open the disc tray.
sub_step2
Pull out the tray completely and load a new disc properly.
sub_step3
Push the disc tray in until it clicks into place.

Caution

  • Be sure to turn off the power when connecting the devices.
    Otherwise, electric shocks or malfunctions may occur.
Back to Main
Return to Top