To use the Wi-Fi function, it may be necessary to perform some settings on the camera and smartphone (or computer).
Registering the access points to connect (wireless LAN router)
Obtaining a dynamic DNS account
Setting the account on this camera
Setting the sender’s e-mail address
Registering the recipient’s e-mail address
Menu Settings
| Setting |
Details |
|
OUT MONITORING SET
|
Configures various settings related to outside monitoring.
PASSWORD (Default: “0000”)
Selects the password to access the camera.
UPnP (Default: “ON”)
Sets the UPnP of the camera.
・ OFF: Disables UPnP.
・ ON: Enables UPnP.
DDNS SETTING
Configures various settings related to DDNS.
|
|
VIDEO MAIL ATTN.
|
Selects the recipient’s e-mail address for video mails.
|
|
DETECT/MAIL SETTING
|
Configures various settings related to notification mails.
RECIPIENT'S EMAIL
Selects the recipient’s e-mail address for notification mails.
DETECTION METHOD (Default: “MOTION DETECTION”)
Sets the detection method to start recording.
・ MOTION DETECTION: Starts recording upon detection of subject’s movements.
・ FACE DETECTION: Starts recording upon detection of human faces.
DETECTION INTERVAL (Default: “10 minutes”)
Sets the time period to enable detection again after the previous one.
SELF RECORDING (Default: “ON”)
Sets whether to record videos on this camera during detection.
・ OFF: Does not record videos on this camera.
・ ON: Records videos on this camera.
|
|
NETWORK SETTINGS
|
Configures various settings related to the network.
ACCESS POINTS
Adds, deletes, or perform LAN settings of access points (wireless LAN router).
Wi-Fi DIRECT SETTING
Configures various settings related to direct monitoring.
・ PASSWORD
Sets the password for direct monitoring.
ENFORCED GROUP OWNER (Default: “ON”)
Sets whether to enforce authorization of the group owner.
・ OFF: Set this if connection to devices that support Wi-Fi Direct fails. (When set to OFF, connection to devices that do not support Wi-Fi Direct will be disabled.)
・ ON: It is recommended to set this usually.
MAIL SETTING
Sets the e-mail addresses of the sender and recipient.
MAC ADDRESS
Displays the MAC address of the camera.
(The above shows the MAC address when connected to an access point, while the below shows the address during direct connection.)
SET FROM WEB BROWSER
Enables configuration of the camera settings from a web browser.
LOCK SETTINGS
Sets a password to prevent others from seeing the network settings.
INITIALIZATION
Returns the network settings to their default values.
|
