Main Page ＞ Copying ＞ Creating Discs with a BD Writer (External Blu-ray Drive) ＞ Preparing a BD Writer (External Blu-ray Drive)

Copying

Preparing a BD Writer (External Blu-ray Drive)

Memo

  • When connecting to the BD writer(external Blu-ray drive), use a USB cable with Mini-A (Male) – B (Male) connectors.
    The USB cable provided with this unit cannot be used.

  • To use the USB cable provided with the BD writer (external Blu-ray drive), purchase the following USB conversion cable.

    • Part number*: QAM0852-001 Mini-A (Male) – A (Female)
    *Consult your nearest service center.

  • 1
  • 2
  • 3
  • 4

Remove the AC adapter and battery pack from this unit.

Open the LCD monitor.

C2C_Monitor_Open

Connect the USB cable and the AC adapter.

C2C_BDBurner_Other
sub_step1
Connect the USB cable of the BD writer (external Blu-ray drive) to this unit.

The USB cable provided with this unit cannot be used.

sub_step2
Connect the AC adapter of the BD writer (external Blu-ray drive).
sub_step3
Turn on the BD writer (external Blu-ray drive).
sub_step4
Connect the AC adapter to this unit.

This unit powers on automatically when the AC adapter is connected.

This unit turns on and the “BACK-UP” menu appears.

While the USB cable is connected, the “BACK-UP” menu is displayed.

Refer also to the instruction manual of the BD writer (external Blu-ray drive).

Insert a new disc.

DVDセット（BD）
sub_step1
Press the eject button to open the disc tray.
sub_step2
Load a new disc properly.
sub_step3
Press the eject button to close the disc tray.

Caution

  • Be sure to turn off the power when connecting the devices.
    Otherwise, electric shocks or malfunctions may occur.
Back to Main
Return to Top