Built-in Viewer Screen Configuration
TOPBuilt-in Viewer settings are stored in cookies.
From this Settings screen, you can set up the Built-in Viewer as the software on the computer. You cannot set up camera operations from this screen.
Some menus may not be displayed depending on the firmware version.
For the latest firmware version, please visit our website.
(The latest firmware version can be found on the Download page of V.NETWORKS.)
If you delete the cookies, the current viewer settings are deleted. The next time when you start the Built-in Viewer, the viewer will operate in the initialized state.
Setting values with 
are default values.
Protocol
Selects a protocol to be used when the viewer acquires data from the camera.
HTTP(Unicast):
Allows monitoring the camera with a single viewer. If a packet is lost, the packet data is transmitted again and recovered.
RTP(Multicast):
Allows multiple viewers to monitor the camera.
[Set values: HTTP(Unicast), RTP(Multicast)]
When playing back via multicast, start multicast sending on the
If you select “RTP(Multicast)” and start the Built-in Viewer, you may be alarmed by the Windows Firewall.
In this case, select “Do not block” and proceed to the next step.
If you select “Block”, the multicast stream will be blocked by the Windows Firewall. The viewer cannot play back multicast data.
Encoder
Select the stream when the protocol is “HTTP(Unicast)”.
[Set values: No.1, No.2, No.3]
Compression format and Framesize
Displays the stream type and the resolution.
When
1080”, the video image displayed may be slightly disrupted at the top edge.
Display Size
Sets a display size of image area.
Fixed:
Sets the image display size to the same as the preset frame size. For frame size setting, see
Variable:
Displays images according to the Web browser’s window size.
[Set values: Fixed, Variable]
The window size of the Web browser does not change even if you select the “Fixed” or “Variable” display size.