[Auto Patrol] Page

TOP

This function sets the Auto Patrol operation which patrols multiple positions at specified time intervals. You can set the order in which to view the determined positions.

This page can be used during access using “admin” or “operator”.

Open the side menu by clicking [Advanced Settings] in the menu, followed by clicking [Auto Patrol 0], [Auto Patrol 1], or [Auto Patrol 2].

Press the [OK] button to enable the new settings.

If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the value before the change was made.

Settings

There are three screens in Auto Patrol.
(The screen below appears when [Auto Patrol 0] is clicked.)

Setting values with circle_B are default values.

No.

Switches the camera image from No. 0 to 99 in sequence.

Title

This displays the title of the position.

Position

This sets the position number to be moved in sequence.

[Set values: 0 to 99]

Memo

Specify the setting for Preset Position in [PTZ Settings] of Built-in Viewer.

[PTZ Settings]

Stay Time

This sets the duration of displaying the images at each position.
For positions that you do not want to display during Auto Patrol, set to “Skip”.

[ Set values: Skip, 10, 20, 30, 45, 60, 120]sec

Moving Speed

This item sets the speed of moving to the preset position.

[Set values: Low, Mid, High]