This hole is used for mounting the camera on the wall.
VN-H657WPU
TOP
Camera securing hole (x4)
Cable connecting hole, cap
Remove the cap and pull out the cables from this hole for connection.
Fall prevention wire
Connects the camera to the wall. Secure the camera tightly to the anchor bolts used to mount the fall prevention wire on the wall.
AC 24 V power cable
For connecting to AC 24 V power.
Alarm signal cable (8 pcs)
This cable is for alarm input and alarm output.
List of Alarm Signal Cable Signals
|
Cable color |
Signal Name |
|---|---|
|
Brown |
Input 1 |
|
Red |
Input 1 (COM) |
|
Orange |
Input 2 |
|
Yellow |
Input 2 (COM) |
|
Green |
Output 1 |
|
Blue |
Output 1 (COM) |
|
Purple |
Output 2 |
|
Gray |
Output 2 (COM) |
LAN cable
For connecting the unit to the network.
It supports PoE Plus (IEEE802.3at Type 2) and enables you to use this camera without having to connect to a power supply using a power cord.
Heater ON/OFF switch
This is the ON/OFF switch of the built-in heater.
The built-in heater prevents the snow or frost from attaching to the dome cover. When installing the heater at an unrequired location, turn OFF the switch of the heater. When it is set to ON, the heater will be automatically controlled to adjust the internal temperature to an appropriate level. It is usually set to ON.
Dome cover fixing screws (x4)
Dome cover
The dome cover is a delicate object. Handle it with care.
Note
It is covered with a protective sheet during shipment. Do not remove this sheet until installation is complete.
[MAC address] indication
The MAC address is a unique physical address of the product. This address cannot be altered.
Camera head
Lens (camera module)
You cannot replace the lens alone.