Adjusting 3D Movies

TOP

3D video images may appear differently to different viewers. It may also be affected by your physical condition at the time of viewing.
You are therefore recommended to adjust the video images accordingly.

Select “Input Signal”

“3D Setting” from the menu

Adjusting parallax (Parallax)

Adjust the displacement of the image for the left and right eyes separately to obtain the best 3D effect.

To do so, use the sankaku_L sankaku_R keys to move the cursor.

Setting range: -15 to +15

Adjusting crosstalk (Crosstalk Cancel)

Double images (overlapping of the left image with the one on the right or vice versa) can be reduced to deliver a clear quality.

To do so, use the sankaku_L sankaku_R keys to move the cursor.

Setting range: -8 to +8

Press the [MENU] button to exit

MEMO

The “3D Setting” settings are saved separately for each input terminal. The name of the currently selected input terminal is shown at the top right corner of the “3D Setting” menu.

To switch to configure the settings for a different input terminal, press the [INPUT] button on the remote control unit, or press the ↑↓ key on the projector unit after turning off the menu screen.