Global
Mobile User Guide

Main Unit - Input Terminals

TOP

V900R_Parts_Name5

[3D SYNCHRO] terminal

By connecting a 3D Synchro Emitter (sold separately) to this terminal, you can view 3D movies.

[HDMI 1] input terminal

[HDMI 2] input terminal

For connecting to devices that support HDMI output. (LINK)

[RS-232C] terminal (D-sub 9-pin male)

The projector can be controlled by connecting a PC to this terminal.

[SERVICE] terminal

For updating the software or using the backup setting feature via a commercially available USB flash drive.

[LAN] terminal (RJ-45)

The projector can be controlled by connecting it to a PC through the computer network for control commands to be sent to the projector.

[TRIGGER] terminal

Output terminal for DC 12 V, 100 mA power supply. It is used for sending output signals to control devices such as an elevating screen that is equipped with a trigger function.

Note that improper connection may damage the projector. (Tip=DC +12 V, Sleeve=GND)

Global
Mobile User Guide
DLA-NZ900 / DLA-NZ800 / DLA-RS4200 / DLA-RS3200
Mobile User Guide