Specifications

TOP


Product Name		D-ILA Projector
Model Name		DLA-NZ900BK, DLA-NZ900BE, DLA-NZ800BK, DLA-NZ800BE, DLA-RS4200K, DLA-RS4200E, DLA-RS3200K, DLA-RS3200E
Display Panel/Size		D-ILA device *1, 2 0.69” 4K D-ILA (4096 x 2160 pixels) x 3
Projection Lens		2.0 x power zoom lens, motorized zoom and focus
Light Source		Laser Diode
Screen Size		Approx. 60” to 280” (Aspect ratio of 16:9) Approx. 60” to 200” (Aspect ratio of 16:9)
Brightness		3300 lm , 2700 lm
Projection Distance		Refer to LINK.
Input Compatibility Signal		Refer to LINK.
Display Resolution		8192 x 4320 pixels (8K/e-shift)
Input Terminal	HDMI Input	Dual, HDMI 19-pin x 2 (HDCP 2.3-compatible) *3
Output Terminal	Trigger Terminal	Single, 3.5 mm DC Power Jack ( ) DC OUT 12 V, 0.1 A
Output Terminal	3D synchro	Dedicated terminal for 3D Synchro Emitter (single, mini-DIN 3-pin)
Control Terminal	RS-232C Terminal	Single, D-sub 9-pin (male) (external control)
	LAN Terminal	Single, RJ45 jack, 10BASE-T/100BASE-TX
	Service Terminal	SERVICE Single (USB Type A) *4
Power Requirements		AC 100 V to 240 V, 50 Hz/60 Hz
Power Consumption		440 W (during normal standby: 1.5 W *5, during Eco Mode standby: 0.3 W)
Operation Environment		Temperature: 5 C to 35 C; humidity: 20% to 80%; storage temperature: -10 C to 60 C
Installation Altitude		Below 6,561 ft (2,000 m)
Dimensions (Width x Height x Depth)		500 mm x 234 mm x 528 mm (19-3/4 in x 9-1/4 in x 20-13/16 in) (including feet) 500 mm x 234 mm x 505 mm (19-3/4 in x 9-1/4 in x 19-15/16 in) (including feet)
Mass		25.3 k (55.7 lb) ,23.1 k (50.9 lb)
Accessories		Refer to LINK.

D-ILA is the abbreviation for Direct Drive Image Light Amplifier.

D-ILA devices are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%. Only 0.01% or less of the pixels are either missing or would remain permanently lit.

HDCP is the abbreviation for High-bandwidth Digital Content Protection system. The image of the HDMI input terminal may not be displayed in some cases due to changes in the HDCP specifications.

For software update and setting backup features.

The power consumption of this product during networked standby when all wired network ports are connected is 1.5 W.

Design and specifications are subject to change without prior notice.

Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order to aid comprehension. Images may differ from the actual product.

This unit has acquired the certification of the “HDR10+” standard set by HDR10 + Technologies, LLC.
Tone mapping is optimally performed for each scene according to the dynamic metadata to faithfully reproduce HDR video images for viewing according to the intentions of the video producer.
HDR10+^™ logo is a trademark of HDR10+ Technologies, LLC.

This unit is isf-certified, so calibration can be performed by an isf-certified trainer.
After calibration is performed, an isf mode is added to the Picture mode.

For more details, please refer to the isf website.

About Trademarks and CopyrightsLINK

Screen Size and Projection DistanceLINK

Types of Possible Input SignalsLINK

Indicator Display on the Main UnitLINK

DimensionsLINK