Display Setup
For setting the color of the background to “Blue” or “Black” when there is no signal input.
This model will change the background color of the menu to black.
|
Setting |
Description |
|---|---|
|
Off |
Menu remains in the original gray background color. |
|
On |
Changes the background color of the menu to black. |
For setting to change the brightness linked to the dynamic control feature while displaying a menu other than “Dynamic CTRL” is “Off”.
|
Setting |
Description |
|---|---|
|
Off |
The dynamic control brightness adjustment is not performed while displaying the menu. |
|
On |
The dynamic control brightness adjustment is performed while displaying the menu. |
When set to “On”, the menu may be difficult to see depending on the input image. In this case, set to “Off”.
For setting the display position of the menu.
For setting the display of the input information to “On” or “Off”.
|
Setting |
Description |
|---|---|
|
Off |
Not displayed. |
|
On |
Shows the input terminal for 5 seconds when input is switched. |
For setting the display of logo during startup to “On” or “Off”.
|
Setting |
Description |
|---|---|
|
Off |
Not displayed. |
|
On |
Displays the “D-ILA” logo for 5 seconds during startup. |
For setting the display language to “English”, “Deutsch”, “Español”, “Italiano”, “Français”, “Português”, “Nederlands”, “Polski”, “Norsk”, “繁體中文”, or “日本語”.