Menu screen for setting time code and user’s bit.
TC/UB Menu
TOPThis item cannot be selected in the Media mode, or during recording.
TC Generator
For setting the operation of the time code.
Free Run(Ext):
External time code input will be synchronized with this and the time code will be recorded.
Free Run:
The time code operates in the run mode at all times regardless of the recording status. It continues to run even when the power of the camera recorder is turned off.
Rec Run:
The time code operates in the run mode during recording. It continues to run in the order of the recorded clips as long as the SD card is not replaced. If the SD card is removed and recording is made on another card, time code will be recorded on the new card from where it was left off in the previous card.
Regen:
The time code operates in the run mode during recording. When the SD card is replaced, the last time code recorded on the card is read and recorded on a new card so that the time code continues in running order.
[Setting Values: Free Run(Ext), Free Run, 
Rec Run, Regen]
TC Preset
For setting the time code (hour, minute, second, frame).
Display:
Drop setting 02:02:25.20
:
Non Drop setting 02:02:25:20
UB Mode
For setting the recording mode of the user’s bit.
Date:
Records the date.
Time:
Records the time.
Preset:
Records according to the preset setting.
[Setting Values: Date, Time, Preset]
Memo
If UB Mode is set to “Time”, the user’s bit operates in the 24-hour format even if the LCD display is in the 12-hour format.
Preset
For setting the user’s bit. (Digit by digit)
Display:
AB CD EF 01
Memo
When [UB Mode] is set to “Date” or “Time”, this item appears as “---” and preset is disabled.
Drop Frame
For setting the framing mode of the time code generator.
Non Drop:
Internal time code generator works in the non-drop-frame mode. Use this setting when placing emphasis on the number of frames.
Drop:
Internal time code generator works in the drop-frame mode. Use this setting when placing emphasis on the recording time.
[Setting Values: Non Drop, Drop]
Memo
This item can be set only when [Main Menu] 
[Record Set] [Record Format] 
Frame & Bit Rate] is set to “60p”, “30p”, or “60i”. When the frame rate is “24p”, “Non Drop” becomes fixed and cannot be selected. When the frame rate is “50p”, “25p”, or “50i”, this item appears as “---” and cannot be selected.