You can check the recorded audio using headphone.
Monitoring Audio Sound During Recording Using a Headphone
TOP
Connect the headphone.
Select the channel to monitor with the [MONITOR] selection switch.
|
Setting |
Description |
|---|---|
|
[CH1] |
Outputs the audio recorded in [CH1]. |
|
[BOTH] |
Outputs the audio recorded in [CH1/CH2]. |
|
[CH2] |
Outputs the audio recorded in [CH2]. |
Use the [MONITOR +/-] button to adjust the monitor volume.
Memo
Audio during recording is not output from the monitor speaker.
Warning tone is output when there is an abnormality in the camera recorder or when the battery is low.
Selecting Audio Output Method When the [MONITOR] Selection Switch Is Set to “BOTH”
When a stereo type earphone jack is connected, perform the following setting to output stereo sound.
Set the [MONITOR] selection switch to “BOTH”.
Set [Main Menu] 
[A/V Set] [Audio Set] [Monitor] to “Stereo”.
[A/V Set] [Audio Set] [Monitor] to “Stereo”.Memo
You can set the volume of the warning tone in [Main Menu] [A/V Set] [Audio Set] [Alarm Level]. (“Off”/“Low”/“Middle”/“High”)