You can change the brightness and peaking of the viewfinder screen according to your usage conditions.
Adjusting the Viewfinder
TOPChanging the brightness of the screen will not affect the recorded images.
Caution
A high-definition viewfinder is used on this camera recorder in order to provide an accurate focusing environment. Due to the characteristic of the display device, colors may appear on the images when you blink your eyes. This is not a malfunction. It does not affect the recorded images, SDI output, AV output, or HDMI output.
Incline the viewfinder vertically to a position that enables easy viewing.
Turn the visibility adjustment lever to adjust the visibility.
Turn the visibility adjustment lever to sharpen the image on the viewfinder screen.
Adjust the brightness, contour, and contrast of the viewfinder screen.
Adjusting the Brightness
Use the [VF Bright] menu to adjust the brightness of the viewfinder screen.
Adjust using [Main Menu] 
[LCD/VF] [VF Bright].
Increasing the value increases the brightness. [Setting Values: +10 to -10] (Default value: 0)
Adjusting the Contour
Use the [PEAKING +/-] button to adjust the contour of the viewfinder screen.
The contour of the LCD monitor will also be adjusted at the same time.
Memo
When [Main Menu] [LCD/VF] [LCD + VF] is set to “Off”, operate after switching to the viewfinder display by pressing the [DISPLAY] button for 2 seconds or longer.
The [PEAKING +/-] operation is disabled in the Media mode, and its value is fixed at “-10”.
Adjusting the Contrast
Use the [VF Contrast] menu to adjust the contrast of the viewfinder screen.
Adjust using [Main Menu] [LCD/VF] [VF Contrast].
Increasing the value increases the contrast. [Setting Values: +10 to -10] (Default value: 0)
Displaying in Black and White
You can display the viewfinder screen in black and white.
[Main Menu] [LCD/VF] [VF Color] item Press Set button ( 
) Select “Off” Press Set button ( ).