This screen displays the media status or event. It is also used to display warnings only.
Display Screen in Media Mode
TOPMedia Display 0 Screen
Appears only during warnings
Media Display 1 Screen
Media Display 2 Screen
Media
Displays the media slot (A or B) of the currently played clip.
appears when the write-protect switch of the SD card is set.
Voltage/Battery Power
Displays the current status of the power supply in use.
Memo
Displayed in the Media Display 0 screen during warnings only.
Resolution
Displays the video image resolution.
Frame Rate/Bit Rate
Displays the frame rate and bit rate in pairs.
Operation Guide
Displays a guide for the current operation buttons.
Audio Level Meter
Displays the audio levels of CH1 and CH2.
Memo
This item is not displayed when [Main Menu] 
[LCD/VF] [Display Settings] [Audio Meter] is set to “Off”.
Volume Operation Indicator
Displayed when there are changes made to the volume of the headphone, speaker (0 to 15), and the value of LCD BRIGHT (-10 to +10).
The [PEAKING +/-] operation is disabled in the Media mode, and its value is fixed at “-10”.
Position bar
Displays the current position in the video.
During trimming, the position bar appears in green, and icons for the in and out points are displayed.
:
Current position of the video
:
Position to start trimming
(In point)
:
Position to end trimming
(Out point)
Information Display
Use the [AE LOCK/4] button to switch between camera information display, GPS display and turning off the display.
The GPS display displays information on the recording location of the video being played back only when GPS information has been recorded.
The local date/time is displayed.
Camera information display displays only information of Gain, Iris, Shutter and White Balance that have been recorded.
Memo
Trimming information is displayed while trimming is in progress. You cannot switch the display using the [AE LOCK/4] button during this process.
Date/Time Display
Displays the date/time that is recorded on the currently played SD card.
Memo
The date/time display style can be specified in [LCD/VF] [Display Settings] [Date Style]/[Time Style].
Time Code ( 
)/User’s Bit ( 
) Display
Displays the time code (hour: minute: second: frame) or user’s bit data.
Example of time code display:
Colon (:) denotes non-drop frames and dot (.) denotes drop frames.
Example of user’s bit display:
Memo
You can specify whether to display the time code, user’s bit, or turn off the display in [TC/UB] of [Main Menu] [LCD/VF] [Display Settings].
Event/Warning Display Area
Displays error messages.
Media Status
PLAY:
Playing
STILL:
Still picture playback mode
FWD *:
High-speed playback in the forward direction (* playback speed: 5x, 15x, 60x, or 360x)
REV *:
High-speed playback in the reverse direction (* reverse playback speed: 5x, 15x, 60x, or 360x)
STOP:
Stop mode
P.OFF:
Power OFF
Check Mark
Displayed when the currently played clip is selected.
OK Mark
Displayed when OK mark has been appended.
Clip Information
Displays current clip number/total number of clips.