Item for specifying settings related to the LCD monitor or viewfinder screen.
LCD/VF Menu
TOPThis menu screen can be used to specify settings related to the Focus Assist mode, zebra pattern display, screen size, marker, and safety zone. In addition, it is also used for selecting whether to display characters on the LCD monitor or viewfinder screen, as well as for adjusting the picture quality of the LCD monitor.
Shooting Assist...
Menu for setting the Shooting Assist function.
Marker Settings...
For setting items such as the safety zone and center mark.
Display Settings...
For specifying display-related settings.
LCD + VF
For selecting a method to switch between the LCD monitor and viewfinder screen displays.
On:
Displays images on the viewfinder at all times.
Off:
Turns off the viewfinder screen display when the LCD monitor is turned on.
[Setting Values: On, Off]
When [Network] is set to “On”, this item is fixed at “Off” and cannot be selected.
VF Color
For selecting whether to display the image on the viewfinder screen in color or black-and-white.
Select “On” to display in color, and “Off” to display in black-and-white.
[Setting Values: On, Off]
The setting of this item is valid only in Camera mode.
When this item is set to “Off”, only the captured images are displayed in black-and-white. The display and menu screens are displayed in color.
VF Bright
For setting the brightness of the viewfinder screen.
Increasing the value increases the brightness.
[Setting Values: -10 to +10 ( 0)]
VF Contrast
For setting the difference in luminance between the darkest and brightness areas in the viewfinder screen.
Increasing the value increases the contrast.
[Setting Values: -10 to +10 ( 0)]
LCD Contrast
For setting the difference in luminance between the darkest and brightness areas in the LCD monitor.
Increasing the value increases the contrast.
[Setting Values: -10 to +10 ( 0)]
LCD Backlight
For setting the brightness of the LCD monitor backlight.
[Setting Values: Bright, Normal]
LCD Mirror
For specifying the image display method when facing the LCD monitor.
Select “Mirror” to display the image after laterally inverting it. (Mirror display)
[Setting Values: Mirror, Normal]
The setting of this item is valid only in Camera mode.
During color bar, menu screen and status screen display, the “Mirror” setting is disabled.
PEAKING (Playback)
For adjusting the contour level of the playback image displayed on the LCD monitor or viewfinder.
When “On” is selected, you can use the [PEAKING +/-] to adjust the level.
[Setting Values: On, Off]