This page is for setting client restrictions.
[Access Restrictions] Page
TOPThis page can be used during access using “admin”.
Click [Advanced Settings] in the side menu, and click [Access Restrictions].
Press the [OK] button to enable the new settings.
If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the value before the change was made. If you press the [Cancel] button, other changed items will also be restored to the values before the change was made.
Memo
This feature is applicable for restricting the acquisition of H.264/JPEG or audio transmission data. It does not impose restrictions on access via a web browser or use of API.
Note
The Access Restriction feature determines whether to impose restrictions during TCP connection by the client. In the case when access restriction is set after TCP connection by a client has been established, TCP connection will not be disconnected.
Settings
Setting values with 
are default values.
Client Address
Restrictions may be imposed on clients accessing the camera using the IP address.
Access Restriction
Deny:
Denies acquisition of H.264/JPEG or audio transmission data from the IP address specified in [IP Address]. Restrictions are not imposed on access to the setting page.
Allow:
Accepts acquisition of H.264/JPEG or audio transmission data from the IP address specified in [IP Address]. Restrictions are not imposed on access to the setting page.
[Set values: Deny, Allow]