Step1 Set the IP Address of the Computer for Configuring the Camera Settings
TOPThe camera is set to “DHCP Disable” (the DHCP client function is Off) by default. The camera is first started up using the following IP address. Set the IP address of the PC correctly so that you can communicate with the following.
(For example, set the IP address to 192.168.0.100 and the subnet mask to 255.255.255.0.)
Note
If multiple cameras are turned on simultaneously in the same LAN environment, access attempts may fail due to IP address duplication. Set up an IP address by either using the JVC-VN-IP SettingTool (included on the supplied CD-ROM) or turning the power supply of each camera on separately to avoid duplication.
IP address of the camera (default)
IP address:
192.168.0.2
Subnet mask:
255.255.255.0
Default gateway:
None