Handling microSD Cards
TOPDo not place any object inside the camera.
Inserting an object other than a microSD card into the microSD card slot may cause fire, electric shock, or malfunction of the product.
Do not disassemble or modify the microSD card.
Before you turn off the power of the camera or remove the microSD card from the card slot, make sure to press the [Unmount] button on the [microSD Card Recording] page.
While writing to the microSD card is in progress, turning off the power or removing the card may damage the data stored inside it.
If there is a likelihood that data stored in the microSD card is damaged, remove the microSD card from the camera, and back up the necessary data. Next, make use of the SD Formatter (version 4.0 or later) distributed by the SD Association to format the microSD card, followed by inserting the card into the camera.
The SD Formatter is available on the following website.
There is a maximum limit to the number of times data on the microSD card can be rewritten. When approaching to the limit, data recording and playback may not function properly. In the event that the recorded data is damaged or when a playback error occurs, replace the microSD card with a new one.
Do not use or store the card at a place that is subject to static electricity or electrical noise.
Make sure that the orientation is correct when you insert the microSD card. Inserting the card forcibly in the wrong orientation may damage the camera or the microSD card.
Our company shall not be liable for any accidental damage caused to the data stored in the card. Please back up important data on devices such as a computer.
To erase data stored in the microSD card completely, it is recommended that you make use of a commercially-available data erasure software program, or destroy the microSD card physically such as by using a hammer.
Use the card within the operational requirements. Do not use it at the following locations.
Places exposed to direct sunlight.
Places near thermal equipment.
In a car under the sun with the windows closed.
Places subject to high humidity, corrosion, etc.
Do not bend or drop the card, or subject it to strong impact or vibrations.
Do not wet the card.
Do not touch the connection terminals.
Prevent dust, dirt, moisture or other foreign substances from being attached to the connection terminals.
Do not peel off the label attached to the microSD card, or attach another label of sticker over it. This may cause the equipment to malfunction.
To write characters on a microSD card, do not use a pencil or ballpoint pen. Make sure that a felt-tip pen is used.
It may be difficult to remove some microSD cards from the slot of the camera.
When removing the microSD card from the card slot, it may sometimes pop out forcefully. Be careful not to lose it.