Follow the procedure below to configure the IP address of the camera.
IP Address Setting Procedure
TOPThis item is described basically for Windows 7/Internet Explorer 8.0.
Set the IP address of the computer for configuring the camera settings.
Configure the Internet Explorer settings in order to establish connection between the computer and the camera.
Connect the computer to the camera.
Set the [IP Setting] item on the [Basic Setting1] screen to “DHCP Disable” or “DHCP Enable”.
Note
Do not reset the camera and do not turn the power supply off immediately after you have changed the settings. Otherwise, your settings will be lost and the camera may returned to the factory defaults.