Shooting Assist Menu

For setting whether to add color to the contour of the focused image upon switching the image to black-and-white.

Setting	Description
On	Enables the function.
Off	Disables the function.

For setting the display color of the focused area when Focus Assist is activated.

Selecting “Multicolor” changes the outline color in sequence from red to green to blue according to the sharpness of the focus.

Setting	Description
Multicolor	Displays the outline in multicolors.
Blue	Displays the outline in blue color.
Green	Displays the outline in green color.
Red	Displays the outline in red color.

For selecting whether to display zebra patterns at the bright areas of the subject.

Setting	Description
On	Displays the zebra pattern.
Off	Does not display the zebra pattern.

For configuring the maximum luminance level for the zebra pattern display.

Setting	Description
5% to 95%, 98%, 100%, Over	For configuring the maximum luminance limit.

For configuring the minimum luminance level for the zebra pattern display.

Setting	Description
0%, 5% to 95%, 98%, 100%	For configuring the minimum luminance limit.

CAMCORDER