-
- Settings Menu
-
Camera Process Menu
Camera Process Menu
Focus can be adjusted manually.
Memo
This is selectable only during Manual recording.
Adjusts the overall brightness of the screen.
Caution
Brightness Adjust cannot be selected in the following cases.
During Auto recording
When “Shutter Speed”, “Aperture” and “Gain Up” are set to “Manual”
When “Backlight Comp” is set to “On”
When “Lolux” is set to “On”
Shutter speed can be adjusted.
Caution
During Auto recording
When “Lolux” is set to “On”
Adjusts the aperture value.
Caution
Aperture cannot be selected in the following cases.
During Auto recording
When “Lolux” is set to “On”
Makes the subject appear bright automatically when recording in dark places.
Caution
This function is not available for selection when “Lolux” is set to “On”.
“Manual” is not available for selection in the Auto Recording mode.
This function is fixed at “AGC” in the Auto Recording mode when “System” is set to “High-Speed”.
“Auto Slow-Shutter” is not available for selection in the Manual Recording mode when “System” is set to “High-Speed”.
Corrects the image when the subject appears dark due to backlight.
Caution
Backlight Comp cannot be selected in the following cases.
During Auto recording
When “System” is set to “High-Speed”
When “Shutter Speed”, “Aperture” and “Gain Up” are set to “Manual”
When “Lolux” is set to “On”
For configuring the Lolux mode (low-light recording mode) to increase the light sensitivity level at a dimly-lit location.
Setting |
Description |
|---|---|
|
On |
Enables the Lolux setting. |
|
Off |
Disables the Lolux setting. |
Memo
This is selectable only during Manual recording.
For adjusting the contour (detail) enhancement level.
Setting |
Description |
|---|---|
|
-10 to -1, 0, +1 to +10 |
Increasing the value increases the sharpness of the contour. |
|
Off |
Does not perform correction. |
For adjustment of the details, go to Detail Adjust Menu .
Memo
This is selectable only during Manual recording.
For adjusting the gamma curve that determines the gradation expression.
Setting |
Description |
|---|---|
|
Standard |
Sets to a standard gamma curve. |
|
Cinema |
Sets to a gamma curve with similar gradation to the screen characteristics of movies. |
Caution
Gamma cannot be selected in the following cases.
During Auto recording
When “WDR” is set to “On”
Adjusts the corresponding gamma level when “Gamma” is set to “Standard” or “Cinema”.
Setting |
Description |
|---|---|
|
-5 to -1, 0, +1 to +5 |
Increasing the value enhances the gradation of the shadows. However, the gradation of bright areas deteriorates. |
When shooting subjects with a wide dynamic range, such as a backlit subject, this function compresses the dynamic range while maintaining image contrast by applying gradation compensation to the input video signals.
Setting |
Description |
|---|---|
|
On |
Sets the wide dynamic range function to “On”. |
|
Off |
Sets the wide dynamic range function to “Off”. |
Caution
WDR cannot be selected in the following cases.
During Auto recording
When “System” is set to “High-Speed”
You can set the color tone to suit the light source.
For white balance adjustment, go to White Balance Adjust Menu .
Memo
This is selectable only during Manual recording.
Configures the color according to the user’s preference using the color matrix (colors represented by the 3 R, G and B values).
Setting |
Description |
|---|---|
|
Standard |
Sets to a standard color matrix. |
|
Cinema Vivid |
Sets to a vivid color matrix that is similar to the screen characteristics of movies. |
|
Cinema Subdued |
Sets to a subdued color matrix that is similar to the screen characteristics of movies. |
Memo
This is selectable only during Manual recording.
The color matrix of the camera can be adjusted to suit the user’s preference.
When shooting is performed using multiple cameras, the colors of the different cameras can be adjusted, and a color of the user’s preference can be set on this camera. The saturation, hue and brightness of the primary and complementary colors (6 colors in total) can be configured individually.
The adjusted values of “Standard”, “Cinema Vivid”, and “Cinema Subdued” in Color Matrix can be stored individually.
Restores “Camera Process” to the default settings.
Caution
This item cannot be selected during recording.