Increasing the Light Sensitivity Level

Automatically increases the light sensitivity when the subject is not bright enough.

Tap “MENU”.

C8C Tap MENU MANUAL

Select “Camera Process” with Cursor_Up or Cursor_Down , followed by tapping “SET”.

C8C Main Menu Camera Process

Select “Gain Up” with Cursor_Up or Cursor_Down , followed by tapping “SET”.

C8C Camera Gain Up 1

Tap batsu to exit the menu.

Tap RETURN to return to the previous screen.

Select the desired item with Cursor_Up or Cursor_Down , followed by tapping “SET”.

C8C Camera Gain Up 2

Setting

Description

Auto Slow-Shutter

Low-speed shutter that can be used to express dynamic motion. (However, it may result in blurring due to camera shake.)

Manual

Manually adjust the brightness.

The brightness level can be configured to one of the following values.
A larger value indicates a higher light sensitivity level.
0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB, 21dB, 24dB

AGC

Adjusts the brightness automatically.

<Go to Step 5 if Manual is selected>

Adjust the brightness to the desired level with Cursor_Up
and Cursor_Down .

C8C Camera Gain Up 3

Memo

Increasing the light sensitivity level may cause the image to appear grainier.

Tap “SET” to confirm.

C8C Camera Gain Up 4

Caution

This function is not available for selection when “Lolux” is set to “On”.

“Manual” is not available for selection in the Auto Recording mode.

This function is fixed at “AGC” in the Auto Recording mode when “System” is set to “High-Speed”.

“Auto Slow-Shutter” is not available for selection in the Manual Recording mode when “System” is set to “High-Speed”.