CAMCORDER GZ-RY980 Detailed User Guide

For configuring the zoom microphone. (Built-in microphone)

Setting	Details
On	Records audio sounds in the same direction as the zoom operation.
Off	Deactivates the zoom microphone.

This function is not available for selection when a microphone is connected to the mic terminal.

When “On” is selected, the volume level at the wide-angle (W) end is lower than that at the telephoto (T) end.

For configuring the audio level during recording on the Audio Level screen.

This function is not available for selection in the Auto Recording mode.

Reduces the noise caused by wind.

Setting	Details
Auto	Activate the function automatically.
On	Activates the function.
Off	Deactivates the function.

This item cannot be selected during recording.

This item is set to “Off” and cannot be changed when “Live Streaming” is set to “On”.

Reduces the degradation of sound quality caused by digital signal processing, and records a sound quality close to the original.

Setting	Details
On	Activates K2 Technology.
Off	Deactivates K2 Technology.

K2 Technology cannot be selected in the following cases.

During recording

When “System” is set to “4K” or “High-Speed”

When “Rec Mode” is set to “Pre Rec”

When “Live Streaming” is set to “On” (this item is set to “Off”)

For configuring the sound during operation.

Setting	Description
High	Increases the volume of the operating sound.
Low	Decreases the volume of the operating sound.
Off	No operating sound is output.

Operation Sound cannot be selected in the following cases.

During recording

When “Silent Mode” is set to “Silent” or “Silent & Dim LCD”

When “Rec Mode” is set to “Pre Rec”

Audio Set Menu