Main Page ＞ Copying ＞ Creating Discs with an External Blu-ray Drive ＞ Preparing an External Blu-ray Drive

Copying

Preparing an External Blu-ray Drive

Memo

    When connecting to the external Blu-ray drive, use a USB cable with Mini-A (Male) – B (Male) connectors.
    The USB cable provided with this unit cannot be used.

  • To use the USB cable provided with the external Blu-ray drive, purchase the USB extension cable.

    • Mini-A (Male) – A (Female)
    (Part number: QAM0852-001)

  • 1
  • 2

Connect the USB cable and the AC adapter.

Turn off the camcorder by pressing the POWER_BUTTON button for about 2 seconds.

C1C_BDBurner1
* The AC adapter shown in the illustration is AC-V11U.
sub_step1
Connect the USB cable of the external Blu-ray drive to this unit.
sub_step2
Connect the AC adapter of the external Blu-ray drive.
sub_step3
Turn on the external Blu-ray drive.
sub_step4
Connect the AC adapter to this unit.

This unit powers on automatically when the AC adapter is connected.

This unit turns on and the “BACK-UP” menu appears.

While the USB cable is connected, the “BACK-UP” menu is displayed.

Refer also to the instruction manual of the external Blu-ray drive.

Insert a new disc.

Press the power button on the external Blu-ray drive to turn on the power.

DVDセット（BD）
sub_step1
Press the eject button to open the disc tray.
sub_step2
Load a new disc properly.
sub_step3
Press the eject button to close the disc tray.

Caution

  • Be sure to turn off the power when connecting the devices.
    Otherwise, electric shocks or malfunctions may occur.
Back to Main
Return to Top